Hdmi Control; Making The Hdmi Control Connections - Pioneer HTS-LX70 Operating Instructions Manual

09

HDMI Control

Chapter 9
HDMI Control
By connecting this unit to an HDMI Control-compatible
Pioneer plasma display or the HDD/DVD recorder with
an HDMI cable, you can control this unit from the remote
control of a connected plasma display, as well as have
the connected plasma display automatically change
inputs in response to operations carried out on this unit.
Refer to the operating instructions for your plasma
display for more information about which operations can
be carried out by connecting via HDMI cable.
• You cannot use this function with components that
do not support HDMI Control.
• We cannot guarantee this unit will work with HDMI
Control-compatible components other than those
made by Pioneer.
Important
• Press to set the remote control to receiver
RCV
control mode in order to operate the receiver
subwoofer (make sure that the LCD displays the
RECEIVER screen, as shown below).
46
En
RECEIVER
ADV F.S.
SURR
SURR SURR

Making the HDMI Control connections

You can use synchronized operation for a connected
plasma display and up to three other components
(including a maximum of two recorders or players).
Be sure to connect the plasma display's audio cable to
the audio input of this unit.
• If you use a commercially available HDMI cable,
check whether the cable supports the HDMI 1.3
standard. Otherwise, the HDMI Control function may
not operate properly.
From HDMI outut
Rear panel
HDMI
OUT IN 3 IN 2 IN 1
IN
SYSTEM
From digital audio
output (optical)
To HDMI input
HDMI Control-compatible
Pioneer plasma display
HDMI Control-compatible
Pioneer HDD/DVD recorder,
Blu-ray disc player or DVD player
Receiver subwoofer
Side panel
ANTENNA
L
AM LOOP
1 IN 2
R
OPTICAL
FM
UNBAL 75 Ω
DIGITAL
ANALOG
AUDIO IN
or
From Audio output