Location
Your Honeywell Wall Safe should be mounted in an obscure location such as a
bedroom or hall closet and must be installed in a 2' x 4' or thicker framed wall. Be
sure that no plumbing pipes or electrical wires run through the wall cutout area
where your wall safe is to be located and that there is room to swing the safe door
open without obstruction. The Wall Safe is 14 inches wide and designed to fit
between standard 16 inch center-to-center wall framing.
Note: Most homes have wall framing construction of 2 x 4' s and/or 2 x 6' s that are
located on 16-inch centers.
Tools Required for Installation
•
Tape measure
•
Pencil
•
Drill
•
Jig saw or equivalent
•
Building square
•
Phillips screwdriver
•
Flashlight
NOTE: Instructions shown are for wood framed wall installation.
Installation for aluminum or steel stud walls may require pre-drilling and/or
alternative mounting screws.
Home and Office Security Safes
Installing Your Wall Safe
3