Sound - Mitsubishi Electric LaserVue L75-A94 Supplemental Owner's Manual

S ound

Sound

Au dio
Settings in this menu are saved for the current input only with the exception of Balance,
which applies to all inputs. Press
menu screen.
To make Audio adjustments while watching TV and without using the menu:
1. Press the AUDIO key.
2. Press to select an audio option.
3. Press to change the setting.
TV Speakers
Bass Controls volume of low-pitched sound from the TV speakers.
Treble Controls volume of high-pitched sound from the TV speakers.
Balance Controls audio balance between the right and left TV speakers
Sou nd Mode
Surround Modifies audio from the TV speakers.
Level Sound On, Off Reduces differences in sound volume between programming segments, such as the
Li sten To
(applies only
to analog
channels from
the ANT input)
(Second Audio
Program)
Sound Glo bal
Analog Audio
Out
Variable Use with headphones. Adjust headphone volume using the TV's volume controls.
On Turns on the internal TV speakers.
Off Turns off the internal TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an A/V receiver, be sure to change the Sound setting
to TV to hear sound from the TV speakers.
Stereo No special audio effects from the TV speakers
• For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
difference between regular broadcast programs and commercial segments.
Mono Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono.
Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
Stereo is displayed when you tune to a channel broadcasting in stereo.
SAP Selects an additional monaural sound track not audible during normal TV viewing.
The SAP signal might be related to the program (such as a sound track in a foreign
language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.
Settings in this menu apply to all inputs. These settings affect audio from the AVR AUDIO
OUTPUT jack.
Fixed Use with an analog A/V receiver. Control volume from the A/V receiver. The
volume of the audio output signal is fixed and is unaffected by the TV's volume
control.
When set to Variable, the audio output signal is adjustable from the TV's volume
controls.
2. TV Menus
to make changes and then press MENU to return to the
For assistance call 1(877) 675-2224
19