Table of Contents
Advertisement
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE TIME
It is necessary to set the internal clock time of the phone to display the time in
the Caller ID display when incoming calls are received. If you subscribe to Caller
ID, the time and date are automatically set when the first call is received.
If the time is not automatically set, follow the steps below:
1
While in the Standby mode, press
and hold the MENU/MUTE button.
3
Press the EDIT/FLASH button.
5
Press the MENU/MUTE button to
exit the program mode.
2
Press the Key button 4
Up/Down buttons
Time Set setting.
4
Using the Key buttons, enter the
month, day, hour, minute and AM/PM
(press key button 1 for AM, 2 for PM).
The cursor will move automatically
after each entry. Enter two digits for
each setting, for example, for April,
press 0,4.
12
13
, or the
to select the
12/16/01, 12:29 PM
Advertisement
Table of Contents
