Setting The Time And Date - Memorex MPH2410 Operating Instructions Manual

MPH2410.O/M.QXD 3/7/03
SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE TIME AND DATE

Change the Time and Date while in the Standby mode as follows:
1
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
3
Press the EDIT/FLASH button to
change the setting; the month setting
will blink.
5
1
Press the 1 Key button to choose AM
or the 2 Key button
PM.
9:35 AM Page 13
2
Press the Scroll Down button
times or the 4 key button
Setting will appear.
4
Set the month using the Key buttons
(0-9). Repeat this step to set the date,
hour, and minutes; the AM/PM
indicator will then be blinking.
6
2
When finished, press and hold the
SAVE/RE/PA button
to choose
two seconds; a long beep will be heard
to confirm the setting has been saved.
You can continue with programming or
press the VOICE MAIL/MENU button
13
1
2
2
for more than
to return to the Standby mode.
three
; the Time
1