Integrated Remote Assistant - HP LC2000r - NetServer - 128 MB RAM User Manual

Chapter 10
Easy linkage with leading management platforms, including HP
OpenView Network Node Manager and Workgroup Node Manager
Support for DMI 2.0, which provides the same Desktop Management
Interface inventory information for NetServers as for desktop PCs
TopTools is included with every NetServer L series server and should be installed
to help your service provider troubleshoot your system. TopTools is located on
HP NetServer Navigator CD-ROM versions G.01.50 and later G versions, as well
as L.10.00 and later L versions.
See the HP NetServer Management Reference Guide for detailed
installation instructions.
You can also download the TopTools software and documentation from
the NetServer Web Site at
http://www.hp.com/go/netserver_mgmt

Integrated Remote Assistant

Integrated Remote Assistant is a separate management controller built into the
NetServer. It enables remote modem-based server management and alerting
through a pager for improved remote administration of your NetServer.
Integrated Remote Assistant provides:
Console redirection, independent of server state
Access regardless of system state for troubleshooting and problem
resolution
Pager notification of critical server events to alert you earlier to problems
Access to the server event log
Server reset and power control
Remote system BIOS update
Password and dial-back security
Remote management capabilities enhanced with pcANYWHERE-32,
providing full remote control of Microsoft Windows NT servers across the
network or over a modem connection
See the HP NetServer Remote Administrator Guide for details.
74
Configuring the NetServer