3. Lower the drive bay assembly and place the drive locks to the locked position. Otherwise, you cannot
close the computer cover.
4. Reconnect the external cables and power cords to the computer. See "Rear connectors" on page 97.
5. If you have replaced the system board, you must update (flash) the BIOS. See "Flash update
procedures" on page 521.
6. Some FRU replacements require the configuration to be updated. See Chapter 6 "Diagnostics, Test
and Recovery Information" on page 39.
.
Chapter 9
Replacing FRUs (Types 7259, 7267, 7269, 7279, 7290, 7297, 7303, 7306, 7408, 7487, 7506 and 7514)
119