Completing the installation
After replacing the parts, you need to install the computer cover and
reconnect cables, including wired internet and power cords. Also,
depending on the parts replaced, you might need to confirm the
updated information in the Setup Utility program. Refer to _Starting
the Setup Utility_ in the User Guide or in the Hardware Maintenance
Manual.
1. Ensure that all components have been reassembled correctly and
that no tools or loose screws are left inside your computer. Refer to
"Locating components and connectors" for the location of the various
components.
2. Make sure that the cables are routed correctly before replacing the
computer cover.
Attention
Keep cables clear of the hinges, sides of the computer chassis, and
system bay.
Chapter 7. Replacing hardware
83