Uefi Boot Menu; Embedded System Management; Idrac Settings Utility; Entering The Idrac Settings Utility - Dell External OEMR R620 Owner's Manual

Owners manual

Table of Contents

UEFI Boot Menu

Menu Item

Select UEFI Boot Option Displays the list of available UEFI boot options (marked with asterisks), select the boot option

Add Boot Option

Delete Boot Option

Boot From File

The Dell Lifecycle Controller provides advanced embedded systems management throughout the server's lifecycle. The

Lifecycle Controller can be started during the boot sequence and can function independently of the operating system.

NOTE: Certain platform configurations may not support the full set of features provided by the Lifecycle Controller.

For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and deploying the

operating system, see the Lifecycle Controller documentation at support.dell.com/manuals.

The iDRAC Settings utility is an interface to setup and configure the iDRAC parameters using UEFI. You can enable or

disable various iDRAC parameters using the iDRAC Settings Utility.

NOTE: Accessing some of the features on the iDRAC Settings Utility requires the iDRAC7 Enterprise License

upgrade.

For more information on using iDRAC, see the

Remote Access Controllers, at support.dell.com/manuals.

Turn on or restart the managed system.

Press <F2> during Power-on Self-test (POST).

In the System Setup Main Menu page, click iDRAC Settings.

The iDRAC Settings screen is displayed.

Description

you wish to use and press <Enter>.

Adds a new boot option.

Deletes an existing boot option.

Sets a one-time boot option not included in the boot option list.

iDRAC7 User's Guide under Software → Systems Management → Dell

Table of Contents

Poweredge r620