Dell External OEMR R620 Owner's Manual page 130

Error Code Message Information
SEL1204
Message
LCD Message Unknown system hardware failure.
Details
Action
TMP0118
Message
LCD Message
Details
Action
TMP0119
Message
LCD Message
Details
Action
TMP0120
Message
LCD Message
Details
Action
TMP0121
Message
LCD Message
Details
Action
VLT0204
Message
LCD Message System board voltage is outside of range.
Details
Action
130
An unknown system hardware failure detected.
If the system event log failed to initialize, platform status and failure events are not
captured. Some management software do not report platform exceptions.
Re-configure system to the minimum supported configuration. If issues persists,
contact support.
The system inlet temperature is less than the lower warning threshold.
System inlet temperature is outside of range.
Ambient air temperature is too cool.
Check the system operating environment.
The system inlet temperature is less than the lower critical threshold.
System inlet temperature is outside of range.
Ambient air temperature is too cool.
Check the system operating environment.
The system inlet temperature is greater than the upper warning threshold.
System inlet temperature is outside of range.
Ambient air temperature is too warm or one or more fans may have failed.
Check the system operating environment and review event log for fan failures.
The system inlet temperature is greater than the upper critical threshold.
System inlet < name > temperature is outside of range. Check Fans.
Ambient air temperature is too warm or one or more fans may have failed.
Check the system operating environment and review event log for fan failures.
name > voltage is outside of the allowable range.
The system board <
System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see Getting Help.