Removing the Connector Cover
To remove the connector cover on the back of the computer, insert your finger under the gap on the
bottom-left side of the cover, and pull gently. Replace the connector cover by aligning the hooks on the right
edge of the cover with the slots on the computer, and then pressing it until it snaps into place.
Back of the HP TouchSmart PC
Features and configurations vary by model
K
Connector
A
USB 2.0 ports (3)
B
Gigabit
Ethernet LAN
(10/100/1G)
I
J
L
Function
Connect USB devices (USB 2.0) such as printers, external hard disk drives, digital
cameras, and MP3 players.
Connect to the Internet through your wired network.
A
B
C
D
E
F
G
H
M
Getting to Know the HP TouchSmart PC
5