Symantec 10547849 - Mail Security For SMTP Installation Manual page 31

Typical , which installs both the Scanner and Control Center on the same
machine in a location you specify, with subcomponents under that location,
or
Custom, which allows you to install a Scanner or the Control Center
individually, as well as specify locations for the MTA data and log
directories (if you are installing a Scanner), or the port number for your
Tomcat installation (if you are installing the Control Center).
5
Type the number of the option you want to select or deselect it, then type 1
to proceed.
The Installation Directory screen is displayed.
6
Specify an alternate location, or type
then type to proceed.
0
The default value is
/opt/Symantec/SMSSMTP/
If you selected the default installation configuration in step
Installation Parameters Summary screen is displayed. Proceed to step 1.
If you selected the custom installation configuration in step5, the Feature
Selection panel is displayed. Proceed to step 7.
7
If you are installing both a Scanner and the Control Center, type
otherwise, type the number for the component you are not installing to
deselect it, and then type
8
If you are installing the Control Center only, proceed to step 12.
If you are installing a Scanner, the MTA Data Directory screen is displayed.
This is the directory used for message queue data. The default location for
this directory is
/opt/Symantec/SMSSMTP/mta
9
Specify an alternate location, or type
then type to proceed.
0
The Log Directory screen is displayed. All log data for this Scanner will be
stored in the directory you specify. The default location for this directory is
/opt/Symantec/SMSSMTP/logs
10
Specify an alternate location, or type
then type to proceed
0
Installing Symantec Mail Security for SMTP
to accept the default value, and then
1
to proceed.
0
accept the default value, and then
1
.
to accept the default value, and then
1
Installing on Solaris and Linux
13 5, the
to proceed,
0
31