Using The Memory Switch - Brother RH-9800 Instruction Manual

6-6. Using the memory switch

The conditions of the memory switches are memorized even if the power is OFF, however, if data of the memory
switches are initialized, the memory switches will be returned to their initial settings (factory default settings).
(K)
(M)
1160Q
1. While pressing the SELECT button (M), press the power switch to turn on the power.
* The two left-side columns of the front panel display (J) are the memory switch number, and the two right-side
columns show the memory switch setting (or value).
2. Press the SELECT button (M) to select the desired memory switch number.
* The setting range is from 00 to 99. However, numbers in unused ranges are skipped.
3. Press the "UP" button (L) or "DOWN" button (K) to select the desired memory switch number.
* For memory switches which can be set to ON or OFF, press the "UP" button (L) to set to "On", and press the
"DOWN" button (K) to set to "OF". "On" represents ON, and "OF" represents OFF.
4. Press the ENTER button (N) to store the memory switch setting.
5. Press the MODE button (1).
* The TROUBLE indicator will flash and the sewing machine will go to normal standby mode.
No.
00 Bar tacking at the sewing start to prevent fraying
Number of stitches for memory switch No. 00
01
* Does not appear when memory switch No. 00
is set to OFF.
02 Bar tacking at the sewing end to prevent fraying
Number of stitches for memory switch No. 02
03
* Does not appear when memory switch No. 02
is set to OFF.
Work clamp operation selection when feed
bracket is at front position
04
(Set to OFF if the cutting block may strike the
Work clamp.)
05 Eyelet buttonhole sewing speed setting
Speed for memory switch No. 05
(If the speed is set to a higher value than
speed A that has been set at the front panel,
06
the speed will not exceed speed A.)
* Does not appear when memory switch No. 05
is set to OFF.
6. USING THE OPERATION PANEL AND FRONT PANEL
Contents
(J)
(L)
(N)
Setting range
OFF: Disabled
ON: Enabled
01: 1 stitch
02: 2 stitches
03: 3 stitches
OFF: Disabled
ON: Enabled
01: 1 stitch
02: 2 stitches
03: 3 stitches
OFF: The work clamp passes underneath the cutting
block, then rises and moves forward.
ON: The work clamp rises and then moves
forward.
OFF: Same speed as speed A set at the front panel.
ON: Different speed from speed A set at the front
panel.
10: 1,000rpm, 11: 1,100rpm, 12: 1,200rpm,
13: 1,300rpm, 14: 1,400rpm, 15: 1,500rpm,
16: 1,600rpm, 17: 1,700rpm, 18: 1,800rpm,
19: 1,900rpm, 20: 2,000rpm
RH-9800
(1)
1019Q
Initial
value
OFF
01
OFF
01
OFF
OFF
18
27