Table of Contents
Advertisement
Section 3 - Configuration
My IPv6 Connection:
Select PPPoE from the drop-down menu.
PPPoE:
Enter the PPPoE account settings supplied by your
Internet provider (ISP).
User Name:
Enter your PPPoE user name.
Password:
Enter your PPPoE password and then retype the
password in the next box.
Service Name:
Enter the ISP Service Name (optional).
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specific ISP. 1492 is the default MTU.
IPv6 DNS Settings:
Select either Obtain. DNS. server. address.
automatically or Use.the.following.DNS.Address.
Primary/Secondary DNS
Enter the primary and secondary DNS server
Address:
addresses.
Enable DHCP-PD
Check to enable DHCP-PD.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the Router's LAN Link-Local Address.
Enable Autoconfiguration:
Check to enable the Autoconfiguration feature.
Autoconfiguration Type:
Select Stateful or Stateless autoconfiguration.
Router Advertisement
Lifetime:
Enter the IPv6 address lifetime (in seconds).
D-Link DIR-140L User Manual
PPPoE
54
Advertisement
Table of Contents
