Table of Contents
Advertisement
Section 3 - Configuration
Phase1 Mode:
Choose if you want to use a main or aggressive mode.
Encapsulation
Enter the amount of time in seconds that the Phase 1 and
Protocol:
Phase 2 keys should last.
PFS Group:
Choose either ESP, AH or ESP.+.AH from the drop-down menu.
Aggressive
Enable or Disable the PFS Group option using the drop-down
Mode:
menu. PFS is an additional security protocol.
Select this option to configure IKE Phase 1 of the VPN Tunnel
Preshare Key:
to carry out negotiation in a shorter amount of time. (This
option is not recommended as it is less secure)
Connecting Type:
Manually enter an ASCII passphrase in box.
Remote ID:
Choose Always.on or Manual from the drop-down menu.
IKE Proposal
Choose from Username, FQDN, User@FQDN, or key.ID using
Settings:
the drop-down menu and then the ID in the box.
IPSEC Proposal
Use this area to Enable IKE Proposals. Then determine the
Encryption and Authentification types, as well as the DH.
Settings:
Group from the drop-down menus.
Use this area to Enable IPSec Proposals. Then determine the
Encryption and Authentification types from the drop-down
menus.
D-Link DIR-140L User Manual
38
Advertisement
Table of Contents
