Replacing The Metal Side Cover, Expansion Module, And Side Access Panel - HP Gt7725 - Compaq Thin Client Troubleshooting Manual

Replacing the Metal Side Cover, Expansion Module, and Side Access Panel

This section has three main steps:
●
Replace the metal side cover.
●
Replace the expansion module holding the PCI-Express card.
NOTE:
●
Replace the access panel.
To replace the metal side cover:
1. Place the metal side cover on the chassis, front side first, making sure to align the screw holes in
the cover with the holes in the chassis (1).
2. Insert and tighten the four screws (2).
Figure 2-6
16 Chapter 2 Hardware Changes
If your thin client does not have an HP gt7725 Expansion Module, omit this step.
Replacing the metal side cover