Audiovox SRSIR001FM - Sirius® Satellite Radio Tuner Installation Manual page 9

PROCEDURE for VERTICAL INSTALLATION of the RRU
1.
Attach a mounting bracket to each side of the RRU, using the 4 Phillips Round Head
Screws (4mm x 8mm).
Phillips Head Screws (4mm x
8mm) used in 4 places
2.
Determine the mounting location and drill 4 x 1/8" (4mm) mounting holes.
Never mount the unit near the fuel tank.
NOTE: If mounting surface is carpeted, use caution when drilling holes to prevent drill bit from
catching on carpet. Cut holes in carpet before drilling into subsurface.
3.
Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and Lock
Washers. Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture
intrusion.
Self-tapping Screw
(5mm x 15mm), w/Flat
Washers and Lockwashers
used in 4 places
WARNING
4x 1/8" (4mm)
mounting holes
Bracket
RRU
Bracket
Carpet
RRU
Carpet
9