PROCEDURE for the MOUNTING of the RRU UNDER THE REAR DECK
Attach the mounting brackets to each side of the RRU, using the 4 Phillips Round Head
1.
Screws (4mm x 8mm).
Phillips Head Screws
used in 4 places (4mm x 8mm)
2.
Determine the mounting location and drill four 4mm mounting holes.
Underside of
Rear Deck
Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and
3.
Lock Washers.
Self-tapping Screw
(5mm x 15mm), w/Flat
Washers and Lockwashers
used in 4 places
1 0
Bracket
4x 1/8" (4mm)
mounting holes
(4 places)
Rear
Deck