Audio Delay - Marantz NR1602 Owner's Manual

Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® " setting (vpage 82) is "Manual".
Setting items
Adjust Channel q Select the speaker tone adjustment method.
Correct the tone of each All : Adjust the tone of all speakers together.
speaker. L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ ® .
• "Curve Copy" is displayed after Audyssey ® Auto Setup has been
performed.
• When you select "Curve Copy" and press
Audyssey Flat?" prompt is displayed. Select either "Yes" or "No", and
ENTER
press
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
When you select "Default" and press
settings.
the "Return settings to the default?" prompt
is displayed. Select either "Yes" or "No", and
ENTER
press
BD
Default settings are underlined.
Setting details
ENTER
, the "Set EQ curve to
.
ENTER
,
.
M-DAX
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
OFF : Do not use M-DAX.
Low : Optimized mode for compressed sources with very weak highs.
Middle : Apply suitable bass and treble boost for all compressed sources.
High : Optimized mode for compressed sources with normal highs.
• This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is
input.
• "M-DAX" settings are stored for each input source.
• When set to "OFF", the M-DAX indicator on the front panel switches off.
• This cannot be set when the surround mode is set to "DIRECT" or "PURE
DIRECT".
M-DAX
• This can also be set by pressing
• Buttons on the remote control unit can be used for operations.
AMP
q Press to set the remote control unit to AMP-operation mode.
M-DAX
w Press .

Audio Delay

While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" (vpage 90) is set to
"ON" and when a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode"
"Game".
84
Default settings are underlined.
Setting details
.
Default settings are underlined.
Setting details
(vpage 102) is set to "Auto" or
Audio Adjust