Part Names And Functions; Front Panel - Yamaha RX-V867BL Owner's Manual

Part names and functions

Front panel

a
MAIN ZONE A (Power)
Switches this unit between on and standby mode.
b
HDMI Through/iPod Charge indicator
Lights up in any of the following cases while the unit is in standby
mode.
• When the Standby Through function is enabled and audio/video from
an external component connected with HDMI is output to a TV
during standby mode (☞p. 107).
• When an iPod/iPhone, which is placed in the Universal Dock for iPod,
is charging while the unit is in standby mode
This indicator also lights up when the Yamaha Wireless System for
iPod is connected to this unit (☞p. 81).
• When the Network Standby function is enabled. This function allows
this unit to be turned on by receiving a command over a network
(☞p. 108).
c
ZONE2
Switches to enable/disable the audio output to Zone2
d
ZONE CONTROL
Switches to Zone2 operation mode. This unit, or its remote control,
can be used to select input sources or adjust volume for an external
amplifier in another room or the built-in amplifier for speakers in
another room (☞p. 126).
a b c
MAIN ZONE
INPUT
PHONES
SILENT CINEMA
l m
J
1 : Usable when you have selected TUNER or SIRIUS input.
e
INFO
Changes the information displayed on the front panel display
(☞p. 10).
f
MEMORY
Registers FM/AM stations as preset stations
channels as preset channels
g
PRESET j / i
Selects an FM/AM preset station
J1
(☞p. 64).
h
FM/AM (CATEGORY l / h)
Sets the FM/AM tuner band to FM or AM
Selects a channel category for a SIRIUS
(☞p. 81).
i
Front panel display
Displays information on this unit
j
TUNING/CH jj / ii
Changes FM/AM tuner frequencies
Radio channels
k
PURE DIRECT
(☞p. 126).
Switches this unit to Pure Direct mode
d e f g h i
ZONE2 ZONE CONTROL INFO MEMORY PRESET CATEGORY
FM AM
SCENE
BD
TV CD RADIO
DVD
PROGRAM
YPAO MIC TONE CONTROL STRAIGHT
HDMI IN
n o p q r
(☞p. 57) or SIRIUS
J1
(☞p. 63).
(☞p. 59) or a SIRIUS preset channel
J1
(☞p. 57).
(☞p. 63).
(☞p. 10).
(☞p. 57) or SIRIUS Satellite
J1
(☞p. 63).
(☞p. 47).
j k
PURE DIRECT
TUNING/CH
VOLUME
VIDEO AUX
VIDEO L AUDIO R
s t
INTRODUCTION
l
INPUT selector
Selects an input source from which to playback. Rotate this selector to
cycle through the input sources in order.
m
PHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
n
YPAO MIC jack
Connect the supplied YPAO microphone and adjust the speaker balance
automatically (☞p. 34).
o
TONE CONTROL
Adjusts high-frequency/low-frequency output of speakers/headphones
(☞p. 43).
p
SCENE
Switches the input source, the sound program, and the HDMI OUT
with a single button (☞p. 44, p. 90). When this unit is in standby
mode, press this key to switch on.
q
PROGRAM selector
Selects a sound program (☞p. 44). Rotate this selector to cycle
through sound programs.
r
STRAIGHT
Changes a sound program to straight decoding mode
s
VIDEO AUX jacks
For connecting game consoles to this unit temporarily
Attach the supplied VIDEO AUX input cover when not using this jack
(☞p. 7).
t
VOLUME
Adjusts the volume level.
(☞p. 45).
(☞p. 29).
8
En