Yamaha RX-V867BL Owner's Manual page 102

MAIN ZONE 2
CODE SET
SOURCE RECEIVER
Parametric EQ
HDMI
1 2 3 4
Adjusts sound quality of tone using a parametric
AUDIO
5 V-AUX 1 2
equalizer.
AV
1 2 3 4
PEQ Select
5 6 MULTI DOCK
Select an equalizer type.
HDMI OUT
TUNER SIRIUS NET
CATEGORY
FM AM Manual
PRESET TUN./CH
INFO MEMORY
Flat
ENHANCER SUR. DECODE
MOVIE MUSIC
SLEEP PARTY STRAIGHT PURE DIRECT
j
SCENE Front
BD
TV CD RADIO
DVD
OPTION
ON SCREEN
k
ENTER VOLUME
RETURN DISPLAY
Natural
TOP POP-UP
MUTE
MENU MENU
REC
Through (Default)
1 2 3 4
5 6 7 8
PEQ Data Copy
9 0 10 ENT
Select 1 of the 3 parametric equalizer types acquired with
INPUT
automatic setup and manually copy that information to the
MUTE
manual adjustments.
Flat > Manual
j
ON SCREEN
k
Cursor B / C / D / E
Front > Manual
k
ENTER
Natural > Manual
Front L / Front R / Center / Surround L / Surround R /
Surround Back L / Surround Back R / Front Presence L /
Front Presence R
The parametric equalizer can be used to manually adjust
sound quality for individual speakers.
Set "PEQ Select" to "Manual" and use "PEQ Data
Copy" to copy information acquired with automatic
Manually adjust equalizer sound.
setup. This information can be used as a basis for
performing manual adjustments.
Adjust individual speakers to achieve the
same characteristics. Select this option if
speakers offer the same quality.
1
Adjust individual speakers to achieve the
same characteristics as the front left and
right speakers. Select this option if front
left and right speakers offer significantly
2
greater quality than other speakers.
Adjust all speakers to achieve a natural
sound. Select this if high-frequency
sounds seem too strong when "PEQ
3
Select" is set to "Flat."
Disable the equalizer.
4
To reset all parameter settings for the selected
speaker, select "Reset to Flat" and press kENTER.
Copy the "Flat" parametric equalizer
information acquired with automatic
5
setup.
Copy the "Front" parametric equalizer
information acquired with automatic
setup.
Copy the "Natural" parametric equalizer
information acquired with automatic
setup.
kCursor B / C
Use repeatedly to select
"Band / Gain," "Freq. / Gain," or "Q / Gain"
and press kENTER.
kCursor D / E
Use repeatedly to adjust the
kCursor B / C
parameter and use
repeatedly to adjust the gain.
kENTER
Press to exit the edit window.
Repeat steps 1 to 3 to configure other
parameters.
jON SCREEN
Press to close the menu.
SETUP
Setting various functions (Setup menu)
Test Tone
Turns the test tone generator on or off.
Off (Default)
Does not generate test tones.
On Generates test tones. While "On" is
selected, test tones are produced
constantly.
You can use the test tone in a variety of
circumstances. For example, you can adjust the
volume balance settings for each speaker, or whenever
you adjust the settings on the internal parametric
equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you
have finished making adjustments.
En
102