Setting This Unit's Multi-Zone Function; Making The Receiver Easier To Use - Yamaha RX-V867BL Owner's Manual

Setting this unit's multi-zone function

Multi Zone Setup items
Zone2 Set Adjusts Zone2 volume level.
Party Mode Set
Enable or disable the party mode function.
Zone Rename Changes the name of each zone.
■
Adjusting Zone2 volume
Zone2 Set
Max Volume
Specify the maximum volume level in Zone2 so that sound is not
too loud.
Adjustable range -30.0 dB to +16.5 dB (maximum volume)
Default setting +16.5 dB
Adjustment 5.0 dB
increments
Initial Volume
Specify the initial volume level in Zone2 when this unit is turned on.
Adjustable range Off, Mute, -80 dB to +16.5 dB
Default setting Off
Adjustment 0.5 dB
increments
■
Setting the party mode
Party Mode Set
In party mode, the main zone sources can be played in Zone2
simultaneously (☞p. 126). Select "Zone2," and then select
"Enable" or "Disable."
Enable (Default) Enables the party mode function.
Disable
Disables the party mode function.
■
Changing Zone name
Zone Rename
Editing the name of the selected zone.
kCursor B / C
1 Use repeatedly to select "Zone
Rename" and press kENTER.
kCursor B / C
2 Press to select a zone you want to
rename and press kENTER.
Press kENTER.
3
Editing the name is available.
kCursor B / C
Press to select a character and press
4
kCursor D / E
to enter the selected character.
5 Repeat step 4 to enter the desired zone name.
SETUP
Setting various functions (Setup menu)
6 Confirm the zone name by pressing
kENTER.
kCursor C
Press to select "OK" and press
7
kENTER
to register the new zone name.
• To cancel the operation without applying changes,
k
select "CANCEL" and press ENTER.
• To clear the characters entered in step 4, select
k
ENTER.
"CLEAR" and press
• Zone names may consist of up to 9 characters.

Making the receiver easier to use

Function Setup items
Auto Power Down
This unit enters standby mode if no operations are
performed.
Display Set Specifies menu items displayed on TV screen and the
front panel.
Trigger Output
Specifies TRIGGER OUT jack function.
Memory Guard Protects some settings against accidental
modification.
109
En