Panasonic AG-HMX100 Manual page 19

AW-HS50
DC 12 V ±10 % (AC adapter provided), 2.0 A
0 °C to 40°C (32 °F to 104 °F)
10 % to 90 % (no condensation)
210 mm x 67 mm x 177 mm
(8-1/4 inches x 2-5/8 inches x 6-15/16 inches) (excluding protrusions)
Approx. 1.4 kg (3.1 lb) (without options)
HD: 1080/59.94i, 1080/50i, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p
SD: 480/59.94i, 576/50i
Y:C :C 4:2:2, 10 bit (8 bit for FMEM)/ RGB 4:4:4, 8 bit
B R
1ME
SDI: 4 lines, BNC x 4
HD (SMPTE292M)/SD (SMPTE259M) standard
0.8 V [p-p] ±10 % (75 Ω)
DVI-D: 1 signal line, DVI-D x 1 (Analog input signals are not supported)
SDI: 2 lines, BNC x 3 (2 output distribution for OUT1)
HD (SMPTE292M)/SD (SMPTE259M) standard
0.8 V [p-p] ±10 % (75 Ω)
DVI-D: 1 signal line, DVI-D x 1 (Analog output signals are not supported.)
—
—
—
—
—
D-sub 15 pin x 1, GPI INPUT x 5 channels (photocoupler sensing),
GPI OUTPUT x 7 channels (open collector output)
RJ45, 10 BASE-T/100 BASE-TX
—
CD-ROM (Operating instructions / Image transmission software), AC adapter
Wipe x 13
Cut, Mix, Wipe
—
1
Linear key, Luminance key, Chroma key*
8
Mix
—
—
—
—
1
Mix
AUX BUS1
SDI-IN 1 to 4, DVI-IN (always-on)
SDI-IN1 to 4, DVI-IN
SDI-IN3, 4
—
SDI-IN 1 to 4
1 system* , Labels, Tally indication, Split-screen (8 Patterns: 4, 5a/5b, 6a/6b, 9 and
10
10a/10b sections)
OSD [Single Screen Display: SDI-OUT 2,DVI-OUT (unshown on SDI-OUT 1)],
Chroma key sample marker, Audio Level Meter: SDI embedded audio (group1/ 1 ch, 2 ch)
2 channels * (The data for the images stored in the frame memories can be retained
11
even when the power is turned off by saving it in the flash memory area which is
incorporated inside the unit.)
—
PinP Preset, Effect dissolve function
*7: May store and recall up to 10 presets (per camera) with current Panasonic pan-tilt systems. *8: May also be used for DSK applications by changing the key layer. *9: Plans call for supporting this
function in the future. *10: OSD, MV frames, Labels, Tally indications, Audio Level Meters, and Camera setting information are not shown on SDI-OUT 1. *11: OSD, MV frames, Labels, Tally indications,
Audio Level Meters, and Camera setting information for MultiViewer Display are not stored in the Frame Memory.
AG-HMX100
AC 100 V to 240 V, 50 Hz/60 Hz, 60 W
5 °C to 40 °C (41 °F to 104 °F)
10 % to 80 % (no condensation)
424 mm x 197 mm x 400 mm
(16-3/4 inches x 7-3/4 inches x 15-3/4 inches) (excluding protrusions)
Approx. 7.9 kg (17.4 lbs) (without options)
HD: 1080/23.98PsF (for 3D only), 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
SD: 480/59.94i, 576/50i
*Mixed operation of different video formats is not possible.
Y:P :P :Key 4:2:2:4, 12 bit (Internal process)
B R
1ME
VIDEO: 2 lines, BNC x 2, Analog Composite, 1.0 V[p-p] (75 Ω)
SDI: 4 lines, BNC x 4
HD (SMPTE292M/296M/299M) /SD (SMPTE259M-C/272M-A, ITU-R. BT.656-4) standard
HDMI: 2 signal lines, HDMI x 2 (Type A connector), incompatible with HDCP Link and VIERA Link
DVI-I: TMDS single link (incompatible with HDCP), compatible with digital/analog RGB
SDI: 4 lines, BNC x 4 (PGM/PVW/AUX/MULTIVIEW x each)
HD (SMPTE292M/296M/299M) /SD (SMPTE259M-C/272M-A, ITU-R. BT.656-4) standard
DVI-D: 2 lines, DVI-D x 2 (PGM/MULTIVIEW x each)
TMDS single link (not compatible with HDCP)
External reference (G/L) input:
BNC x 2 (with loop-through), 1.0 V [p-p] (75 Ω), Analog composite (NTSC/PAL)
Advanced reference (ADV-REF) output:
BNC x 1, 75 Ω, Analog composite
Sync: 0.286 V [p-p] (NTSC)/0.3 V [p-p] (PAL)
Burst: 0.286 V [p-p] (NTSC)/0.3 V [p-p] (PAL)
AUDIO input: XLR: 4 lines (L and R), +4/0/–3 dBm switchable, balanced, 600 Ω
SDI (embedded audio): 4 lines, HD (SMPTE292M/296M/299M)/SD (SMPTE259M-C/272M-A, ITU-R BT.656-4) standard
HDMI (embedded audio): 2 lines, Type A connector (not compatible with HDCP)
AUX input: Pin jack: 1 line (L and R),–10 dBV, High impedance, unbalanced
MIC input: M6 x 1 line, –60 dBV, 2 kΩ, monaural, unbalanced
AUDIO output: PGM: XLR: 1 line (L and R), +4/0/–3 dBm switchable, Low impedance, balanced
Pin jack: 1 line (L and R), –10 dBV, Low impedance, unbalanced
PGM/PVW/AUX OUT: SDI (Embedded Audio) x 1,
HD (SMPTE292M/296M/299M)/SD (SMPTE259M-C/272M-A, ITU-R BT.656-4) standard
PHONES output: M6 x 1, 8 Ω, stereo, unbalanced, –∞ dBu to –20 dBu
—
—
D-sub 9 pin x 1, RS-232C
TALLY output: D-sub 9 pin x 1, 8 Cross point, Open-collector, Maximum current: Less than 50 mA,
Maximum Voltage: 35 VDC
GPI: BNC x 1, Make-Contact
—
—
CD-ROM (Operating instructions), Power code (3 core cable)
Wipe (BASIC1+2) x 37, Wipe (+MULTI) x 16, Wipe (BLIND) x 23, Wipe (MATRIX) x 7,
Squeeze (COMP+SINGLE) x 13, 2ch Squeeze (COMP+BOTH) x 8, Slide x 8
Cut, Mix, Wipe (including DVE)
Image effect: PGM/A, PST/B BUS Effect: Mosaic, Defocus, Mono, Time effects, Decay, Paint, Nega, Mirror
1
Linear key, Luminance key, Chroma key, Full key
Cut, Mix, Wipe (including DVE)
Wipe x 6
1
Luminance key
Mix
1
Mix
—
SDI-IN 1 to 4, DVI-I IN, HDMI 1 to 2/Composite video 1 to 2
SDI-IN 1 to 4, DVI-I IN, HDMI 1 to 2/Composite video 1 to 2
—
—
Every A/B bus
1 system
Labels, Tally indication, Split-screen (the screen split into 10a only)
OSD (several MULTI outputs), WFM, Audio level meter, Embedded audio(SDI, HDMI)
1 systems: still images and movie clips
—
Event memory (100 patterns), Key learning (20 patterns)
(As of April, 2012)
18