Setting The Basic Pattern Key [Basic Pattern Key]/Pattern Key [Pattern Key] - Panasonic AG-HMX100 Operating Instructions Manual

Setting the Basic Pattern Key
[BASIC PATTERN KEY]/Pattern Key
[PATTERN KEY]
The [BASIC PATTERN KEY] menu or [PATTERN KEY] menu
is used to create a key with key patterns.
The [BASIC PATTERN KEY] menu appears when the
selected pattern has a number in the range of 3001 to
3046, and the [PATTERN KEY] menu appears when the
selected pattern has a number of 3301 or larger.
 For pattern numbers, refer to "List of Key Patterns" at the
back of Volume 2.
[BASIC PATTERN KEY] menu
This menu is displayed when the selected pattern has a
number in the range of No. 3001 to No. 3046.
POS. X 128 Y 128
Z 196
EVENT ME TIME
00 1:00
E F
BASIC PATTERN KEY
PATTERN WIDTH
EDGE HARD
EFFECTS
OFF
KEY EMPTY
LEARN 9000
[PATTERN KEY] menu
This menu is displayed when the selected pattern has No.
3301 or larger.
The [PATTERN KEY] menu allows you to make settings for
video cropping.
POS. X 128 Y 128
Z 196
EVENT ME TIME
00 1:00
E F
PATTERN KEY
PATTERN WIDTH
EDGE HARD
CROP
0
EFFECTS
OFF
KEY EMPTY
LEARN 9000
Scroll the screen to display.
PATTERN INT
3001 WHT
COLOR K LEVEL
16 WHITE 255
SETUP
PATTERN INT
3301 WHT
COLOR K LEVEL
16 WHITE 255
0 0 0
SETUP
[PATTERN EDGE]
The items other than [K LEVEL] can be set in the same way
as the transition (wipe) pattern ( page 4).
For [K LEVEL], set the key level (transparency level of the
key) in the range of 0 to 255 using the rotary 5 control.
The smaller the setting value, the higher the transparency.
When 0 is set, the key disappears entirely (becomes
transparent).
The key registered in the direct patterns can be individually
set for each pattern.
[CROP] (for [PATTERN KEY] menu only)
Video used as the key can be cropped.
Rotary 1 Rotary 2 Rotary 3
CROP
0
0-243(480i) 0-243(480i)
0-288(576i) 0-288(576i)
0-720(720p) 0-720(720p)
0-540(1080i) 0-540(1080i)
Set the top edge of the video in the range of 0 to 243
(480i)/288 (576i)/720 (720P)/540 (1080i) using the rotary 2
control.
The factory default setting is 0.
Set the bottom edge of the video in the range of 0 to 243
(480i)/288 (576i)/720 (720P)/540 (1080i) using the rotary 3
control.
The factory default setting is 0.
Set the left edge of the video in the range of 0 to 720
(480i/576i)/1280 (720P)/1920 (1080i) using the rotary 4
control.
The factory default setting is 0.
Set the right edge of the video in the range of 0 to 720
(480i/576i)/1280 (720P)/1920 (1080i) using the rotary 5
control.
The factory default setting is 0.
For top and bottom edge settings, when one is increased,
the other may be decreased to prevent the total value of
both settings from exceeding the maximum value.
For right and left edge settings, when one is increased, the
other may be decreased to prevent the total value of both
settings from exceeding the maximum value.
[EFFECTS]
Settings can be made in the same way as in the [EFFECTS]
submenu of the [TRANSITION] menu ( page 4).
[KEY LEARN]
See "Setting Key Learn [KEY LEARN]" ( page 9).
Rotary 4 Rotary 5
0 0 0
0-720(480i) 0-720(480i)
0-720(576i) 0-720(576i)
0-1280(720p) 0-1280(720p)
0-1920(1080i) 0-1920(1080i)
5