Setting [Memory]; Setting The Audio Level [Audio Level] - Panasonic AG-HMX100 Operating Instructions Manual

Setting [MEMORY]

This section describes the method of allocating memory
for internal video and titles separately. The memory is
used to save the internal video created from input video
( page Vol.1-30) and title keys ( page 8).
The [MEMORY] submenu of the [SETUP] menu is used.
 NOTE
If the memory settings are changed in this submenu, all data
saved in the memory is cleared.
Rotary 1 Rotary 2 Rotary 3
MEMORY INT V TITLE
30
0-30 0-30
(480/59i)
0-30 0-30
(576/50i)
0-14 0-14
(720p)
0-6 0-6
(1080i)
1
Set [INT V] (internal video memory size) using
the rotary 2 control and [TITLE] using the rotary
3 control, respectively.
The total memory size (number of frames) varies
with the video format ( page Vol.1-26). When the
size of either internal video memory or title memory
is increased, the other may be automatically
decreased to prevent the sum of the two values from
exceeding the total memory size.
If the [INT V] or [TITLE] value is changed, * appears
under [INT V] or [TITLE], respectively.
2
Press the key with * displayed.
The message [OK?] appears.
3
Press the key again to fix the change.
To cancel the change, press the
holding down the SHIFT key.
If other menu screen is displayed when * is being
displayed, the settings return to the previous values
without being updated.
The factory default settings are as shown below.
Video Format
1080/59i
1080/50i
720/59p
720/50p
480/59i
576/50i
Rotary 4 Rotary 5
0
(480/59i)
(576/50i)
(720p)
(1080i)
key while
[INT V] [TITLE]
3 3
3 3
7 7
7 7
15 15
15 15
Setting the Audio Level
[AUDIO LEVEL]
The audio level is indicated by the audio level meter on the
setting screen ( page Vol.1-20).
The [AUDIO LEVEL] submenu of the [SETUP] menu is used
to make the settings for the audio level.
Rotary 1 Rotary 2 Rotary 3
AUDIO ALIGN.
LEVEL 0dB
-3dB
0dB
4dB
AG-HMX100P
Rotary 1 Rotary 2 Rotary 3
AUDIO ALIGN.
LEVEL 0dB
-3dB
0dB
4dB
AG-HMX100E
Set [ALIGN.] to [−3dB], [0dB] or [4dB] using the rotary 2
control.
The factory default setting is [0dB]
Set [HEAD] (head room) to [18dB] or [20dB] using the
rotary 5 control.
The factory default setting is [20dB] (AG-HMX100P) or
[18dB] (AG-HMX100E).
When the head room value is changed, the reference mark
of the audio level meter ( page Vol.1-20) is also changed
on the Setting screen.
Rotary 4 Rotary 5
HEAD
20dB
18dB
20dB
Rotary 4 Rotary 5
HEAD
18dB
18dB
20dB
27