Rear Panel - Onkyo A-9050 Owner's Manual

Rear Panel

a 2
5 6 7
GND screw
Connects the turntable's ground wire.
MODE selector (A-9050 only)
DIGITAL IN OPTICAL D3 jack (A-9050 only)
Connects components such as CD players with optical
digital audio output.
DIGITAL IN COAXIAL D1/D2 jacks (A-9050 only)
Connect components such as CD players with coaxial
digital audio output.
PHONO (MM) L/R jacks
Connect a turntable with analog audio output.
LINE IN 1/2/3/4 L/R jacks
Connect playback devices with analog audio output.
LINE OUT L/R jacks
Connect components such as analog line-level
sources. The input signals are output with no level
adjustment.
PRE OUT L/R jacks (A-9050 only)
Connect a power amplifier when the integrated
amplifier is used as a preamplifier (Pre mode).
3 4
8 9 j k l
PREOUT SUBWOOFER jack
REMOTE CONTROL jack
Connect Onkyo components such as Onkyo Docks,
CD Players, or Tuner with
jacks.
SPEAKERS A terminals
Connect Speakers A.
SPEAKERS B terminals
Connect Speakers B.
AUTO STANDBY selector
Enables or disables the Auto standby function.
SPEAKER IMPEDANCE selector (A-9050 only)
Switches the speaker impedance to 4 Ω or 8 Ω.
AC INLET (A-9050 only)
Connects the supplied power cord. The other end of
the power cord should be connected to a suitable wall
outlet.
POWER CORD (A-9030 only)
See "Connections" for connection information
page 12).
(➔
m n o p
(Remote Interactive)
En
9