Adjusting The Bass, Treble And Balance; Muting The Sound; Using Headphones - Onkyo A-9050 Owner's Manual

Adjusting the Bass, Treble and Balance

You can adjust the bass, treble and left/right output
balance respectively.
■
Operating on the integrated amplifier
BASS –/+ TREBLE –/+
1
Turn the BASS –/+, TREBLE –/+ and BALANCE
L/R knobs.
Tip
• By default, bass, treble and balance is set to the center position.
Note
• While the Direct function is enabled, bass and treble are
disabled.
En
24
You can temporarily mute the output of the integrated
amplifier.
1
BALANCE L/R
• While the integrated amplifier is muted:
1
• Always turn down the volume before connecting your
• When headphones are connected, the SPEAKERS button

Muting the Sound

Press MUTING.
The SPEAKERS (A/B) and SELECTOR LEDs blink.
To unmute the integrated amplifier, press MUTING
again.
Note
– Adjusting the volume or setting the integrated amplifier to
Standby will unmute the integrated amplifier.

Using Headphones

PHONES jack
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the PHONES
jack.
When connecting the headphones, the SPEAKERS
(A/B) LEDs go off.
You can adjust the volume and mute the sound, by
using VOLUME / .
While headphones are connected, no sound is output
from the speakers and PRE OUT jacks.
Note
headphones.
cannot be used.
MUTING