Removing the Mainboard
1. Perform the
"Removing the ODD
described on pages
2. If a WLAN module is installed, remove it. Perform the
procedure described on pages 3-19.
3. Perform the
"Removing the
4. Perform the
"Removing the Palmrest Module/Upper
page 3-25.
5. Detach the transparent tape securing the LCD cable (1), and then disconnect the LCD (2)
and microphone (3) cables from the mainboard.
Figure 1-51. LCD Cable Tape, LCD Cable and Microphone Cable
6. Disconnect the speaker cable from the mainboard.
Figure 1-52. Speaker Cable
Machine Maintenance
Module" and
3-11
and
3-15
respectively.
Keyboard" procedure described on page 3-23.
"Removing the HDD
Module" procedures
"Removing the WLAN
Cover" procedure described on
0
Module"
3-37