Removing The Fingerprint Board - Acer TravelMate P643-V Service Manual

Removing the Fingerprint Board

1. Perform the "Removing the Palmrest Module/Upper
page 3-25.
2. Open the connector latches for the touchpad and fingerprint board cables (1), and then
disconnect the cables (2).
Fingerprint
board cable
Figure 1-40. Touchpad and Fingerprint Board Cables
3. Remove the screws securing the touchpad bracket.
Figure 1-41. Touchpad Bracket Screws
Table 3-12. Screws
Step
Touchpad Bracket Disassembly
Machine Maintenance
Cover" procedure described on
Touchpad
cable
Screw
M2 × L3
Quantity Screw Type
3
0
3-31