Default Hardware Configurations; Supported Software - HP ProLiant DL590/64 Manual

Deployment of Red Hat Linux 7.2 for Itanium™ Processor on ProLiant DL590/64 Servers

Default Hardware Configurations

Table 1 lists the default configurations of the ProLiant DL590/64 server models available for
purchase.
Table 1. ProLiant DL590/64 default configurations
Processors
Memory Boards
SDRAM
Memory Expansion
Hard Drives
Power Supply
System Power Module
Redundant Hot Plug
Fans
Network Interface
RAID Controller
LS-120
CD – ROM
Form Factor
1
Memory for the ProLiant DL590/64 must meet very tight specifications due
to timing requirements of the memory support chipset used in the server. All
memory used within the ProLiant DL590/64 must conform to those exact
specifications. For this reason, Compaq does not support transferring memory
modules from other non-Itanium platforms into the ProLiant DL590/64.

Supported Software

All Compaq support software and drivers that are supported for use on the ProLiant DL590/64
server are included in the Red Hat Linux 7.2 for Itanium Processor operating system, which may
be ordered online at www.redhat.com/software/linux/7-2_itanium.html.
Future updates to Compaq support software will be provided for download at
www.compaq.com/support/files/server/us/locOsCat/70.html.
16S6-0502A-WWEN
Configuration 1
2 x 733 MHz/2 MB
(4 proc sockets)
1 memory board
(32 DIMM sockets)
(64 DIMM socket
capable with
optional second
memory board)
1 GB (4 x 256 MB)
1
Multiples of 4
C100 v1.2 CL2
up to 32 GB
Optional
1
(support for 3)
1
(support for 3)
Standard
Dual Port 10/100
Embedded
Standard
Standard
7U Rack
Configuration 2
2 x 800 MHz/4 MB
(4 proc sockets)
2 memory boards
(64 DIMM sockets)
4 GB (8 x 512 MB)
Multiples of 4
C100 v1.2 CL2
up to 64 GB
Optional
2
(support for 3)
2
(support for 3)
Standard
Dual Port 10/100
Embedded
Standard
Standard
7U Rack
4