Mpio Mpio Properties Page Before Reboot; Mpio Properties Page After Reboot - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

3. After the server reboots, add support for iSCSI devices using the MPIO applet
Figure 37).
NOTE:
You must present a virtual disk to the initiator to enable the Add support for iSCSI devices
check box (see Figure
Figure 36 MPIO MPIO Properties page before reboot
.
Figure 37 MPIO Properties page after reboot
.
4. Reboot the system to MPIO the devices.
36).
(Figure 36
MPX200 Multifunction Router
and
63