DAELIM VJF125 Service Manual page 58

FAIL-SAFE FUNCTION
If the ECU checks something wrong , the vehicle can be driven by its fail safe function.
However, if there are something wrong in fuel pump, injector, crank position sensor, the engine operation
can be impossible.
If there is something wrong in the EMS, it has fail safe function in order for engine to
work and to cover a minimum driving of vehicle.
INTAKE
INTAKE
CAUTION
!
If the MIL on and blink, starting and driving are temporary by fail safe
function, but, because the conditions of engine operation are not perfect, this can be used in an urgent case.
In this case, safe repairing of vehicle shall be required.
INTAKE
INTAKE
The value of intake pressure is fixed as the
pressure just before when the intake pressure
sensor is out of order.
The valve of intake temperature is fixed to
The value of intake temperature is fixed as a
20.25 when the intake pressure sensor is out
temperature just before when the intake
of order.
pressure sensor is out of order.
EMS(Engine Management System)
MIL
: MIL off
: MIL on/off
: MIL on
: MIL on
on
5-7