Editing A Target; Removing A Target; Managing Groups - HP ProLiant DL320e User Manual

8. In the Select Targets screen table, the Status field displays progress messages as HP SUM
verifies the credentials you entered.
NOTE:
the entire domain, not just the iLO. During the discovery process, if HP SUM detects that an
iLO is part of a target domain, HP SUM asks you if you want to manage the entire domain,
or if you want to continue to update just the iLO. To add the OA and manage the entire
domain, click Enter OA Credentials.

Editing a target

1. Highlight a target, and then click Edit Target.
2. Type a brief description of the target (optional).
3. Enter the root or administrator user name and password.
4. Click OK after entering the information to exit this page.

Removing a target

Select a target, highlighting the entire line, and then click Remove Target.
If you remove a target, HP SUM removes the target from any groups and any scheduled updates.

Managing groups

To add a new group:
1. Enter a Group Name.
2. Enter a Description (optional).
3. From the Available Targets list, select the targets to add to the group.
4. Click Add.
5. When you are finished, click OK.
To edit an existing group:
1. Select targets in the Available Targets list and then click Add to add one or more targets to
the group.
2. Select the targets in the Targets in Group list, and then click Remove to remove one or more
targets from the group.
3. Enter a Description (optional).
4. Click OK.
HP Integrity servers only: If an iLO is part of a domain, HP recommends managing
Selecting the targets 23