Selecting The Targets - HP ProLiant DL320e User Manual

Selecting the targets

The Select Targets screen automatically detects the local system running HP SUM and adds it to
the targets list. To find new targets, click Find Targets or Add Single Target. For more information,
see "Finding and discovering targets" (page 21)
If you have an enclosure that has different target types that share credentials and need to be
updated at the same time, create a group to manage them. For more information on creating and
editing groups, see
The table displays the following target information:
Check box—Targets with selected check boxes are updated. Click the check box to select or
clear a target for update.
Target Name—This field displays the IP address of the target or group.
Status—This field displays a message indicating whether or not the target is ready to be
updated. Enter the credentials for each target you are updating. For more information, see
"Entering target credentials" (page
NOTE:
take inventory of the target. No analysis occurs until you click Next.
Last Updated—This field displays the last time the target was updated. If HP SUM can find
the log from the last update, HP SUM shows a link to open a log file.
Associated Targets—This field displays the associated devices of the target.
Description—This field displays the description of the target.
Type—This field displays the type of target (for example, iLO or Onboard Administrator).
NOTE: For HP SUM to discover a Broadcom NIC during an online update, you must bring the
NIC up in Linux. From a command line, enter # ifup ethx or # ifconfig ethx up.
20 Using the HP SUM GUI
"Managing groups" (page
The target status Ready means that HP SUM can detect the target, and is able to
or "Adding a single target" (page
23).
22).
22).