Esata Device - Toshiba PQX32U-04M01M User Manual

Problem
External devices
connected to the
compatible ports do not
work when connected
to a compatible port.
The "USB WakeUp
function" does not work.

eSATA device

In addition to the information in this section, please also refer to the
documentation supplied with your eSATA device.
Problem
eSATA device does not
work
User's Manual
Procedure
Some external devices may not work when
connected to a compatible port when the "USB
Sleep and Charge function" is [Enabled].
Reconnect the external device after turning ON
the computer.
If the external device still does not work,
connect device to an USB port that does not
have the USB Sleep and Charge function-
compatible icon (
and Charge function" setting to [Disabled].
When "USB Sleep and Charge function" is set
to [Enabled], the "USB WakeUp function" does
not work for ports that support the USB Sleep
and Charge function.
In that case, use an USB port that does not
have the USB Sleep and Charge function-
compatible icon (
and Charge function" setting to [Disabled].
Procedure
Remove the eSATA device from the computer
and then reconnect it to a free port it in order to
ensure it is firmly attached.
Ensure that any required eSATA device drivers
are properly installed - to achieve this you should
refer to both the device documentation and the
operating system documentation.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Troubleshooting
) or change the "USB Sleep
) or change the "USB Sleep
9-18