Internal Display Panel - Toshiba PQX32U-04M01M User Manual

Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to Chapter 5,
Problem
Output to screen is
garbled

Internal display panel

Apparent display panel problems may be related to the computer's setup
and configuration - please refer to Chapter 7,
information.
Problem
No display
Markings appear on the
LCD screen
Problems above remain
unresolved or other
problems occur
User's Manual
The Keyboard
Procedure
Please refer to your software's documentation to
ensure that its is not remapping the keyboard in
any way (remapping involves changing or
reassigning the function of each key).
If you are still unable to use the keyboard, you
should contact your reseller, dealer or service
provider.
Procedure
Press the Fn + F5 hot keys to adjust the display
priority, and to make sure it is not set for output to
an external monitor.
These marks may have come from contact with
the keyboard, Touch Pad while the display has
been closed. You should try to remove the marks
by gently wiping the display panel with a clean
dry cloth or, if this fails, with a good quality LCD
screen cleaner. In this latter instance you should
always follow the instructions with the screen
cleaner and always ensure you let the LCD
screen dry properly before closing it.
You should initially refer to the documentation
supplied with you software to determine if it is
this that is causing the problems. Alternatively
you may wish to run the TOSHIBA PC
Diagnostic Tool to check the general operation
of the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Troubleshooting
for further information.
HW Setup, for further
9-8