Display
This tab is only supported some models and can let you customize your
computer's display settings for either the internal display or an external
monitor.
Power On Display
This tab allows you to select the display to be used when the computer is
started. Please note that this setting is only available on standard VGA
mode and is not available as part of the Windows Desktop properties.
Auto-Selected
System LCD Only
Boot Priority
Boot Priority Options
This tab allows you to select the priority for booting the computer - the
following settings are available:
FDD −> HDD −>
CD-ROM −> LAN
HDD −> FDD −>
CD-ROM −> LAN
FDD −> CD-ROM −>
LAN −> HDD
HDD −> CD-ROM −>
LAN −> FDD
CD-ROM −> LAN −>
FDD −> HDD
CD-ROM −> LAN −>
HDD −> FDD
User's Manual
Selects an external monitor if one is connected,
otherwise, it selects the internal display (default).
Selects the internal LCD, even if an enternal
monitor is connected.
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
hard disk drive, 3. CD-ROM
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. floppy
*1
diskette drive
, 3. CD-ROM
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
*2
CD-ROM
, 3. LAN, 4. hard disk drive.
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. CD-
*2
ROM
, 3. LAN, 4. floppy diskette drive
The computer looks for bootable files on devices
in the following order: 1. CD-ROM
floppy diskette drive
The computer looks for bootable files on devices
in the following order: 1. CD-ROM
hard disk drive, 4. floppy diskette drive
*2
, 4. LAN.
*2
, 4. LAN.
*1
*2
, 2. LAN, 3.
*1
, 4. hard disk drive.
*2
, 2. LAN, 3.
*1
HW Setup
*1
, 2.
*1
, 2.
.
.
7-2