PowerShot S230 DIGITAL ELPH/DIGITAL
IXUS v
3
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Confirm that the camera's [Communication] setting is set to
[Normal].
See the Camera User Guide for information about the
camera's [Communication] settings.
2
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
3
Set the mode switch to the replay mode and turn the camera's
power on. This will prepare the camera to exchange data with the
computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 106) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
•RAW images cannot be recorded.
•The My Camera function is not supported.
USB Port
USB Cable
2. Insert the connector with the
the camera and cable aligned.
DIGITAL • A/V OUT Terminal
1. Slip a fingernail
under the terminal
cover and lift to
open.
USB Cable
symbols on
101