Canon PowerShot A60 Software Starter Manual page 56

50
Enjoy Customizing Your Camera with the My Camera Settings
9
Click the [Save] tab, confirm that the sound file was created, input a
file name and then save it.
10
Click the [Save] button, add a file name and save it.
Repeats steps 4-10 as required to create sound files for the
shutter sound, operation sound and self-timer sound.
11
Click
12
Click the [Add File] button in the My Camera window.
In the Open dialog, select the file you created and click [Open].
The selected file will appear in the Computer list.
This concludes the process for adding a file to the My Camera settings. You
can add the file to the camera with the procedures described in the Saving
the My Camera Settings to the Camera section (p. 45).
•To delete a setting, select the file name and click the [Delete]
•Record the sound as an 11.025 kHz or 8.000 kHz, 8 bit, mono
to close the My Camera Sound Maker window.
button at the bottom of the My Computer list.
sound in the WAV format. The following chart shows
standard time lengths for My Camera Sounds.
Type
Start-Up Sound
Shutter Sound
Operation Sound
Self-Timer Sound
Duration in Seconds
11.025 kHz
1.0 sec. or less
0.3 sec. or less
0.3 sec. or less
2.0 sec. or less
8.000 kHz
1.3 sec. or less
0.4 sec. or less
0.4 sec. or less
2.0 sec. or less