Powershot S500 Digital Elph/Digital Ixus 500; Powershot S410 Digital Elph/Digital Ixus 430 - Canon PowerShot S60 Software Starter Manual

PowerShot S500 DIGITAL ELPH/DIGITAL IXUS 500

PowerShot S410 DIGITAL ELPH/DIGITAL IXUS 430

How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
2
Set the mode switch to the playback mode and turn the camera's power on.
This will prepare the camera to exchange data with the computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.3
See ArcSoft Camera Suite 1.3 CD-ROM (p. 77) for information about the features and
installation procedures for the programs on the disk.
Non-Supported Programs and Features
The camera does not record RAW images.
USB Port
Interface Cable
To the DIGITAL
Terminal
1. Slip a fingernail under the terminal
cover and lift to open.
2. Insert the interface cable connector
all the way into the digital terminal
until it clicks.
97