Performing A Health Check - HP ProLiant BL420c User Manual

To resolve these issues, you must use the VCSU to upgrade the firmware.

Performing a Health check

HP SUM 5.0 can deploy VC firmware, however, it is necessary to perform a health check before
updating with HP SUM.
NOTE: Use VCSU instead of HP SUM in the following cases:
Updating enclosures that are not part of a domain
Unhealthy VC domains
If you need to specify activation order
1. Download VCSU.
2. Run VCSU with the "healthcheck" parameter.
For example:
vcsu -a healthcheck -i ACTIVE_ONBOARD_ADMINISTRATOR_IP -u USERNAME
-p PASSWORD
For more information, see the HP BladeSystem c-Class Virtual Connect Support Utility on the
HP website at:
c02923479.pdf
40 Troubleshooting
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02923479/