Compaq StorageWorks 3000 - RAID Array Release Note page 4

Compaq StorageWorks RAID Array 3000 for Microsoft Windows
Table 1 lists the minimum system requirements need for the RAID Array 3000.
Table 1 Minimum System Requirements
Host Feature
Platform
Operating System
Controller Compatibility
Adapter Compatibility
The StorageWorks Command Console (SWCC) version 2.2 is the only configuration
utility that will work with your RAID Array 3000. Command Console version 2.2
sometimes referred to as Client, runs on Windows NT 4.0 SP4, and Windows 2000.
Required Driver Revisions
HSZDISK
HSZDISK.SYS is a class driver required for all RAID Array 3000 Windows NT
configurations. It is designed to enhance the error recovery features built into your
Compaq RAID system, and to provide more robust operation than the native Windows
NT SCSI disk class driver. HSZDISK.SYS only affects DIGITAL RAID devices. Other
SCSI disk drives in your system continue to be serviced by the native SCSIDISK.SYS
class driver. The drivers included in the CD-ROM labeled Compaq StorageWorks
RA3000 Solution Software version 1.3 for Windows NT. The install process will
automatically determine if you are working in Windows NT 4.0 or Windows 2000.
Page 4
Requirements
X-86 P200 System. 64MB RAM, 10 MB Disk Space
Windows NT 4.0 SP4 ,Windows 2000 for SWCC client; Windows
NT 4.0 SP6a ,Windows 2000 SP1 for SWCC Agent
The HSZ22 controller running operating firmware, version D11X.
DG-SWXA3-BD
AA–RAD0D–TE