Simm Installation - Asus SP97 User Manual

III. INSTALLATION

SIMM Installation

1. The SIMM memory modules will fit in only one orientation as shown because
the plastic safety tab on one end of the SIMM sockets requires the notched end
of the SIMM memory modules.
72-Pin SIMM Sockets
2. Press the memory module firmly into place starting from a 45-degree angle,
making sure that all the contacts are aligned with the socket.
3. With your fingertips, rock the memory module into a vertical position so that it
clicks into place. The plastic guides should go through the two mounting holes
and the clips should snap.
Support Clip
Safety Tab (This Side Only)
To release the memory module, push both clips outward and rock the module
out of the clips
ASUS SP97 / SP97-V User's Manual
1 2 3 4
72 Pin DRAM in SIMM Socket
Notched End
Mounting Hole
21