Asus Striker Extreme Owner's Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. Striker Extreme
  6. Owner's manual
Asus Striker Extreme Owner's Manual

Asus Striker Extreme Owner's Manual

Asus motherboard owner's manual
Hide thumbs Also See for Striker Extreme:
Table of Contents

Advertisement

Quick Links

See also: Code List
Striker
Extreme

Advertisement

Table of Contents
loading

Related Manuals for Asus Striker Extreme

Summary of Contents for Asus Striker Extreme

  • Page 1 Striker Extreme...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Contents Notices ... vii Safety information ... viii About this guide ... ix Striker Extreme specifications summary ... xi Chapter 1: Product introduction Welcome! ... 1-1 Package contents ... 1-1 Special features ... 1-2 1.3.1 Product highlights ... 1-2 1.3.2 ASUS unique features ...
  • Page 4 4.1.1 ASUS Update utility ... 4-1 4.1.2 Creating a bootable floppy disk ... 4-4 4.1.3 ASUS EZ Flash 2 utility ... 4-5 4.1.4 Updating the BIOS ... 4-6 4.1.5 Saving the current BIOS file ... 4-8 BIOS setup program ... 4-9 4.2.1...
  • Page 5 Contents 4.3.2 System Date ... 4-13 4.3.3 Language ... 4-13 4.3.4 Legacy Diskette A ... 4-13 4.3.5 Primary IDE Master/Slave ... 4-14 4.3.6 SATA 1 ~ 6 ...4-16 4.3.7 HDD SMART Monitoring ... 4-17 4.3.8 Installed Memory ... 4-17 4.3.9 Usable Memory ...
  • Page 6 Tools menu ... 4-42 4.8.1 ASUS Music Alarm ... 4-42 4.8.2 ASUS O.C. Profile ... 4-43 4.8.3 ASUS EZ Flash 2 ... 4-45 Exit menu ... 4-46 Chapter 5: Installing an operating system ... 5-1 Support CD/DVD information ... 5-1 5.2.1 Running the support CD/DVD ...

  • Page 7: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.

  • Page 8: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.

  • Page 9: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 10: Conventions Used In This Guide

    Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 11: Striker Extreme Specifications Summary

    - 4 x 240-pin DIMM sockets support non-ECC unbuffered DDR2 800/667/533 MHz memory modules - Supports up to 8 GB system memory Note: Visit the ASUS website at www.asus.com for the latest Qualified Vendors List (QVL). 1200 MHz 2 x PCI Express™ x16 slots support NVIDIA SLI™...
  • Page 12 Intelligent overclocking tools: - AI NOS™ (Non-delay Overclocking System) - AI Overclocking (intelligent CPU frequency tuner) - AI Booster Overclocking protection: - ASUS C.P.R. (CPU Parameter Recall) LCD Poster EL I/O Onboard LED Onboard Switches: Power / Reset / Clr CMOS...
  • Page 13 Striker Extreme specifications summary Internal connectors BIOS features Manageability Accessories Support DVD contents Form factor *Specifications are subject to change without notice. ** available when the installed CPU is supporting 1333MHz FSB. 1 x Floppy disk drive connector 1 x IDE connector for 2 devices 6 x Serial ATA connectors 3 x USB 2.0 connectors support six additional USB 2.0...

  • Page 15: Chapter 1: Product Introduction

    This chapter describes the motherboard features and the new technologies it supports. Product introduction...
  • Page 16 Chapter summary Welcome! ... 1-1 Package contents ... 1-1 Special features ... 1-2 ASUS Striker Extreme...

  • Page 17: Welcome

    Thank you for buying an ASUS The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

  • Page 18: Special Features

    Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating environment-friendly and recyclable products/packaging to safeguard consumers’ health while minimizing the impact on the environment.
  • Page 19 See page 5-34 for details. IEEE 1394a support The IEEE 1394a interface provides high speed digital interface for audio/video appliances such as digital television, digital video camcorders, storage peripherals & other PC portable devices. See pages 2-29 and 2-33 for details. ASUS Striker Extreme...
  • Page 20 S/PDIF digital sound ready This motherboard provides convenient connectivity to external home theater audio systems via coaxial and optical S/PDIF-out (SONY/PHILIPS Digital Interface) jacks.It allows to transfer digital audio without converting to analog format and keeps the best signal quality. See pages 2-27, 2-29 and 2-38 for details.

  • Page 21: Asus Unique Features

    The ASUS fanless design allows multi-directional heat flow from major thermal sources in the motherboard to lower overall system temperature, resulting in quieter operation and longer system life. ASUS has devoted special efforts to address the thermal issues across the motherboard, and most notably in the following areas: CPU, power, VGA, Northbridge and Southbridge.

  • Page 22: Onboard Leds

    Onboard LEDs This motherboard features onboard LEDs located near connector labels, allowing you to connect cables and devices without a flashlight. With this ASUS-patented feature, you can easily identify connector locations to make sure that cables and devices are plugged in and installed correctly. See page 2-1 for details.
  • Page 23 Wake up to the music of your choice instead of the irritating sound of an alarm clock. The ASUS Music Alarm gives you a personal wake-up call with your favorite CD music without having to enter the OS. See pages 4-42 and 5-22 for details.
  • Page 24 Chapter 1: Product Introduction...

  • Page 25: Chapter 2: Hardware Information

    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Hardware information...
  • Page 26 Before you proceed ... 2-1 Motherboard overview ... 2-2 Central Processing Unit (CPU) ... 2-7 System memory ... 2-15 Expansion slots ... 2-22 Jumper ... 2-25 Audio Card and EL I/O Installation ... 2-26 Connectors ... 2-27 ASUS Striker Extreme...

  • Page 27: Before You Proceed

    Before you install or remove any component, make sure to press the onboard LED switch first and the standby power LED is off. Failure to do so may cause injury or severe damage to the motherboard, peripherals, and/or components. On Board LED switch ASUS Striker Extreme...

  • Page 28: Motherboard Overview

    Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis ® STRIKER EXTREME Chapter 2: Hardware information...

  • Page 29: Asus Stack Cool 2

    2.2.3 ASUS Stack Cool 2 The motherboard comes with the ASUS Stack Cool 2 cooling solution that lowers the temperature of critical heat generating components. The motherboard uses a special design on the printed circuit board (PCB) to dissipate heat that critical components generate.

  • Page 30: Motherboard Layout

    SPDIF_O1 1394a ESATA12 LAN1_USB12 ® Silicon Image 3132 LAN2_USB34 CHA_FAN1 Audio slot OPT_FAN2 OPT_TEMP2 Marvell 88E1116 PCIEX1 Marvell 88E1116 STRIKER EXTREME OPT_TEMP1 OPT_FAN1 SPDIF_O2 OPT_TEMP3 IE1394_2 24.5cm (9.6in) LGA775 ® NVIDIA ® NFORCE 680i SLI USB910 PCIEX16_1 PCIEX16_2 CR2032 3V...

  • Page 31: Layout Contents

    PS/2 keyboard port (purple) Supreme FX Line In port (light blue) Line Out port (lime) Microphone port (pink) Center/Subwoofer port (orange) Side Speaker Out port (gray) Rear Speaker Out port (black) ASUS Striker Extreme Page 2-15 2-24 2-24 2-24 Page 2-25...
  • Page 32 Hard disk drive activity LED (2-pin IDE_LED) • System warning speaker (4-pin SPEAKER) • ATX power button/soft-off button (2-pin PWR) • Reset button (2-pin RESET) ASUS Q-connector (system panel) Thermal sensor cable connectors Onboard switches Clear CMOS switch Power-on switch Reset switch Page...

  • Page 33: Central Processing Unit (Cpu)

    ASUS will shoulder the cost of repair only if the damage is shipment/transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA775 socket.

  • Page 34: Installing The Cpu

    Locate the CPU socket on the motherboard. ® STRIKER EXTREME STRIKER EXTREME CPU Socket 775 Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab.
  • Page 35 (B) until it snaps into the retention tab. If installing a dual-core CPU, connect the chassis fan cable to the CHA_FAN1 connector to ensure system stability. ASUS Striker Extreme Load plate Alignment key CPU notch Gold triangle mark...

  • Page 36: Installing The Cpu Heatsink And Fan

    2.3.2 Installing the CPU heatsink and fan The Intel LGA775 processor requires a specially designed heatsink and fan ® assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel and heatsink assembly. If you buy a CPU separately, make sure that you use only Intel •...
  • Page 37 Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. ® STRIKER EXTREME STRIKER EXTREME CPU fan connector Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. ASUS Striker Extreme...
  • Page 38 To uninstall the CPU heatsink and fan: Disconnect the CPU fan cable from the connector on the motherboard. Rotate each fastener counterclockwise. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard.
  • Page 39 (The photo shows the groove shaded for emphasis.) Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation. ASUS Striker Extreme Narrow end of the groove 2-13...

  • Page 40: Installing The Optional Fan

    2.3.4 Installing the optional fan Install the optional fan only if you are using a passive cooler or a water cooler. Installing the optional fan with an active CPU cooler will interfere with the airflow and destabilize the system. Position the fan above the pipe and heatsink assembly.

  • Page 41: System Memory

    DDR DIMM socket. The figure illustrates the location of the DDR2 DIMM sockets: ® STRIKER EXTREME STRIKER EXTREME 240-pin DDR2 DIMM sockets Channel Channel A DIMM_A1 and DIMM_A2 Channel B DIMM_B1 and DIMM_B2 ASUS Striker Extreme Sockets 2-15...

  • Page 42: Memory Configurations

    • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. Visit the ASUS website at www.asus.com for the latest DDR2 Qualified Vendors List. • Due to chipset resource allocation, the system may detect less than 8 GB system memory when you installed four 2 GB DDR2 memory modules.
  • Page 43 Striker Extreme Motherboard Qualified Vendors Lists (QVL) DDR2-667MHz capability Size Vendor Chip No. 256MB KINGSTON HYB18T256800AF3 512MB KINGSTON D6408TEBGGL3U 1024MB KINGSTON D6408TEBGGL3U 256MB KINGSTON HYB18T256800AF3S 256MB Qimonda HYB18T512160AF-3S 512MB Qimonda HYB18T512800AF3S 1024MB Qimonda HYB18T512800AF3S 256MB Qimonda HYB18T512160BF-3S 512MB Qimonda HYB18T512800BF3S...
  • Page 44 Striker Extreme Motherboard Qualified Vendors Lists (QVL) DDR2-667MHz capability Size Vendor 512MB Super Talent 1024MB Super Talent 512MB SMART 512MB SMART 512MB Veritech 1024MB Veritech 512MB TwinMOS 1024MB NANYA 2048MB NANYA 512MB NANYA 1024MB Aeneon 512MB Aeneon 1024MB Aeneon 512MB...
  • Page 45 Striker Extreme Motherboard Qualified Vendors Lists (QVL) DDR2-800MHz capability Size Vendor Chip No. 512MB KINGSTON K4T51083QC 1024MB KINGSTON Heat-Sink Package 1024MB KINGSTON Heat-Sink Package 512MB Qimonda HYB18T256800AF25F 256MB Qimonda HYB18T512160BF-25F 512MB Qimonda HYB18T512800BF25F 1024MB Qimonda HYB18T512800BF25F 512MB SAMSUNG EDD339XX 256MB...
  • Page 46 Striker Extreme Motherboard Qualified Vendors Lists (QVL) DDR2-800MHz capability Size Vendor 512MB Elixir 512MB Kingbox 1024MB Kingbox 512MB NANYA 1024MB NANYA 512MB UMAX 1024MB UMAX 1024MB CORSAIR 1024MB Mushkin Side(s): SS - Single-sided DIMM support: Supports one module inserted in any slot as Single-channel memory configuration...

  • Page 47: Installing A Dimm

    Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. Remove the DIMM from the socket. ASUS Striker Extreme DDR2 DIMM notch Unlocked retaining clip DDR2 DIMM notch 2-21...

  • Page 48: Expansion Slots

    Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

  • Page 49: Interrupt Assignments

    PCIEx16_3 PCIEx1_1 PCI Slot_1 shared PCI Slot_2 USB 1.1 USB 2.0 LAN_1 LAN_2 PATA shared SATA_1 SATA_2 SATA_3 SATA_RAID 1394 Audio ASUS Striker Extreme – – – – shared – – – – – – – – shared – –...

  • Page 50: Pci Slots

    2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. Refer to the figure below for the location of the slots. 2.5.5 PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications.

  • Page 51: Jumper

    Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values. • To prevent accidental pressing of the Clear CMOS switch, the CLRTC jumper default setting disables the switch. ASUS Striker Extreme CLRTC_EN Normal Clear RTC (Default)

  • Page 52: Audio Card And El I/O Installation

    Audio Card and EL I/O Installation 2.7.1 Audio Card Installation Take out the Audio card from the package. Align the card connector with the slot and press firmly until the card sits on the slot completely. 2.7.2 EL I/O Installation Take out the EL I/O from the package.

  • Page 53: Connectors

    LAN port LED indications. 32-bit OS LAN port LED indications Activity/Link Speed LED YELLOW* YELLOW* ORANGE * Blinking ASUS Striker Extreme Description Soft-off Mode During Power ON/OFF 100 Mbps connection ACTIVITY/ SPEED LINK LED LAN port...
  • Page 54 64-bit OS LAN port LED indications Activity/Link YELLOW* YELLOW* YELLOW* * Blinking Line In port (light blue). This port connects the tape, CD, DVD player, or other audio sources. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel, 6-channel, and 8-channel configuration, the function of this port becomes Front Speaker Out.
  • Page 55 Press this switch to turn on the onboard LEDs. 16. Optical S/PDIF Out port. This port connects an external audio output device via an optical S/PDIF cable. 17. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. ASUS Striker Extreme 2-29...

  • Page 56: Internal Connectors

    FDD cable with a covered Pin 5. ® STRIKER EXTREME STRIKER EXTREME Floppy disk drive connector IDE connector (40-1 pin PRI_IDE) The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable. There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray.
  • Page 57 ® STRIKER EXTREME STRIKER EXTREME IDE connector Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4, SATA5, SATA6) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 0+1, RAID 5, or JBOD configuration with the onboard NVIDIA MediaShield™...
  • Page 58 USB 2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard. 2-32...
  • Page 59 Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard! You can connect the 1394 cable to ASUS Q-Connector (1394, red) first, and then install the Q-Connector (1394) to the 1394 connector onboard. ASUS Striker Extreme...
  • Page 60 ® STRIKER EXTREME STRIKER EXTREME Fan connectors • Only the CHA_FAN1 and OPT_FAN 1~3 connectors support the ASUS Q-FAN 2 feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled OPT_FAN1 or OPT_FAN2 for better themal environment.

  • Page 61: Atx Power Connectors

    Remove the jumper caps only when you intend to use the chassis intrusion detection feature. ® STRIKER EXTREME STRIKER EXTREME Chassis intrusion connector ATX power connectors (24-pin EATXPWR, 2 x 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation.

  • Page 62: Power Supply Requirements

    • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 550 W. • Do not forget to connect the 4-pin/8pin EATX12V power plug; otherwise, the system will not boot.
  • Page 63 IDE-HD CD-ROM +12V-V2 +12V-V1 (4 PIN) (24PIN) Io_max (A) 12.36 Io_rms (A) 8.98 Vout (V) 11.93 11.93 Po_max (W) 147.45 90.67 ASUS Striker Extreme +3.3V +12V 6.88 8.72 8.88 5.86 5.026 3.32 11.57 34.58 28.95 102.74 +3.3V +12V 8.44 3.24 4.28...
  • Page 64 Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. ® STRIKER EXTREME SPDIF_O2 STRIKER EXTREME SPDIF OUT connector The S/PDIF module is purchased separately. 2-38 Chapter 2: Hardware information...

  • Page 65: System Panel Connector

    10. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. ® STRIKER EXTREME STRIKER EXTREME System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Page 66 ASUS Q-Connector (system panel) You can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q- Connector. Connect the front panel cables to the ASUS Q-Connector.

  • Page 67: Onboard Switches

    Press the clear CMOS switch to clear setup information when the system hangs due to overclocking. ® STRIKER EXTREME STRIKER EXTREME CMOS switch To prevent accidental pressing of the Clear CMOS switch, the CLRTC jumper default setting disables the switch. See page 2-25 for details. ASUS Striker Extreme...

  • Page 68: Reset Switch

    Power-on switch Press the clear power-on switch to wake/power up the system. ® STRIKER EXTREME STRIKER EXTREME Power on switch Reset switch Press the reset switch to reboot the system. ® STRIKER EXTREME STRIKER EXTREME Reset switch 2-42 Chapter 2: Hardware information...

  • Page 69: Chapter 3: Powering Up

    This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system. Powering up...
  • Page 70 Chapter summary Starting up for the first time ... 3-1 Turning off the computer ... 3-2 ASUS Striker Extreme...

  • Page 71: Starting Up For The First Time

    Check the jumper settings and connections or call your retailer for assistance. At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS Striker Extreme...

  • Page 72: Turning Off The Computer

    Turning off the computer 3.2.1 Using the OS shut down function If you are using Windows Click the Start button then click Shut Down... Make sure that the Shut Down option button is selected, then click the OK button to shut down the computer. The power supply should turn off after Windows If you are using Windows Click the Start button then select Turn Off Computer.

  • Page 73: Chapter 4: Bios Setup

    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup...
  • Page 74 Managing and updating your BIOS ... 4-1 BIOS setup program ... 4-9 Main menu ... 4-15 Extreme Tweaker menu ... 4-18 Advanced menu ... 4-25 Power menu ... 4-30 Boot menu ... 4-37 Tools menu ... 4-42 Exit menu ... 4-46 ASUS Striker Extreme...

  • Page 75: Managing And Updating Your Bios

    Input/Output System (BIOS) setup. ASUS Update (Updates the BIOS in Windows ASUS EZ Flash 2 (Updates the BIOS in DOS using a floppy disk or a USB flash disk.) Award BIOS Flash Utility (Updates the BIOS in DOS mode using a bootable floppy disk.)
  • Page 76 Updating the BIOS through the Internet To update the BIOS through the Internet: Launch the ASUS Update utility from the Windows > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from the Internet option from the drop-down menu, then click Next.
  • Page 77 Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: Launch the ASUS Update utility from the Windows > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from a file option from the drop-down menu, then click Next.

  • Page 78: Creating A Bootable Floppy Disk

    4.1.2 Creating a bootable floppy disk Do either one of the following to create a bootable floppy disk. DOS environment a. Insert a 1.44MB floppy disk into the drive. b. At the DOS prompt, type format A:/S then press <Enter>. Windows XP environment ®...

  • Page 79: Asus Ez Flash 2 Utility

    4.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing <Alt>...

  • Page 80: Updating The Bios

    The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. Download the latest BIOS file from the ASUS web site. Unzip the file and save it to a floppy disk.
  • Page 81 BIOS file. Remove the floppy disk then press <F1> to restart the system. ASUS Striker Extreme AwardBIOS Flash Utility for ASUS V1.18 (C) Phoenix Technologies Ltd. All Rights Reserved For C55XEMCP55PXE-StrikerE-00 Flash Type - Unknown Flash File Name to Program: 0116.bin...

  • Page 82: Saving The Current Bios File

    The utility saves the current BIOS file to the floppy disk, then returns to the BIOS flashing process. AwardBIOS Flash Utility for ASUS V1.18 (C) Phoenix Technologies Ltd. All Rights Reserved For C55XEMCP55PXE-StrikerE-00 Flash Type - Unknown Flash File Name to Program: 0116.bin...

  • Page 83: Bios Setup Program

    The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS Striker Extreme...

  • Page 84: Bios Menu Screen

    • The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS information. 4-10 Configuration fields...

  • Page 85: Legend Bar

    A configurable field is enclosed in brackets, and is highlighted when selected. To change the value of a field, select it then press <Enter> to display a list of options. Refer to “4.2.7 Pop-up window.” ASUS Striker Extreme Function Displays the General Help screen...

  • Page 86: Pop-Up Window

    Power Boot 15 : 30 : 36 Thu, Apr 6 2006 [English] [1.44M, 3.5 in.] Legacy Diskette A: [ST321122A] [ASUS CDS520/A] Disabled ... [ ] [None] 720K , 3.5 in..[ ] [None] 1.44M, 3.5 in..[ ]...

  • Page 87: Main Menu

    [English] [French] [Deutsch] [Chinese (Trad.)] [Chinese (Simp.)] [Japanese] 4.3.4 Legacy Diskette A [1.44M, 3.5 in.] Sets the type of floppy drive installed. Configuration options: [Disabled] [720K , 3.5 in.] [1.44M, 3.5 in.] ASUS Striker Extreme Advanced Power Boot Tools 15 : 30 : 36...

  • Page 88: Primary Ide Master/Slave

    4.3.5 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information. Main PIO Mode UDMA Mode Primary IDE Master Access Mode...
  • Page 89 FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active. ASUS Striker Extreme 4-15...
  • Page 90 4.3.6 SATA1/2/3/4/5/6 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information. Main Extended IDE Drive Access Mode Capacity Cylinder...

  • Page 91: Hdd Smart Monitoring

    Allows you to enable or disable the HDD Self-Monitoring Analysis and Reporting Technology (SMART) feature. Configuration options: [Disabled] [Enabled] 4.3.8 Installed Memory [xxx MB] Shows the size of installed memory. 4.3.9 Usable Memory [XXX MB] Shows the size of usable memory. ASUS Striker Extreme 4-17...

  • Page 92: Extreme Tweaker Menu

    Loads the optimal settings for the system. Loads the standard settings for the system. Loads overclocking profiles with optimal parameters for stability when overclocking. The ASUS Non-delay Overclocking System feature intelligently determines the system load and automatically boosts the performance for the most demanding tasks. Exit...

  • Page 93: System Clocks

    Allows you to set the PCIEX16_3 overclocking frequency. Configuration options: [100 MHz]~[200 MHz] SPP <-> MCP Ref Clock, MHz [Auto] Configuration options: [Auto] [200.0 MHz] [200.5 MHz] [201.0 MHz] [201.5 MHz]...[500.0 MHz] ASUS Striker Extreme [100] [100] [100] [Auto] Select Menu...

  • Page 94: Fsb & Memory Config

    FSB & Memory Config This sub-menu allows you to adjust the system frequency-related items. Select an item, then press <Enter> to edit. Extreme Tweaker FSB & Memory Config FSB - Memory Clock Mode FSB - Memory Ratio FSB (QDR), MHz Actual FSB (QDR), MHz MEM (DDR), MHz Actual MEM (DDR), MHz...

  • Page 95: Overclocking

    Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7] tRP [Auto] Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7] tRAS [Auto] Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[31] ASUS Striker Extreme [17] [Disabled] [Auto] 12 X 1.2000V...

  • Page 96: Spread Spectrum Control

    Command Per Clock (CMD) [Auto] Configuration options: [Auto] [1 clock] [2 clock] tRRD [Auto] Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[15] tRC [Auto] Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[31] tWR [Auto] Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7] tWTR [Auto] Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[15] tREF [Auto]...

  • Page 97: Over Voltage

    DDR2 Channel B Ref Voltage VCore Voltage [Auto] Configuration options: [Auto] [1.90000V] [1.89375V] [1.88750V] [1.88125V] [1.87500V]...[0.83750V] [0.83125V] Memory Voltage [Auto] Configuration options: [Auto] [1.850V] [1.875V] [1.900V]...[3.400V] [3.425V] ASUS Striker Extreme [Auto] Item Specific Help [Auto] [Auto] Set CPU VID to desired...

  • Page 98: Nvidia Gpu Ex

    1.2V HT Voltage [Auto] Configuration options: [Auto] [1.20V] [1.25V] [1.30V]...[1.90V] [1.95V] NB Core Voltage [Auto] Configuration options: [Auto] [1.20V] [1.25V] [1.30V]...[2.70V] [2.75V] SB Core Voltage [Auto] Configuration options: [Auto] [1.50V] [1.55V] [1.60V] [1.65V] [1.70V] [1.75V] [1.80V] [1.85V] CPU VTT Voltage [Auto] Configuration options: [Auto] [1.20V] [1.25V] [1.30V] [1.35V]...[1.50V] [1.55V] DDRII Controller Ref Voltage [Auto] Configuration options: [Auto] [DDR2_Vol/2] [DDR2_Vol/2-30mv] [DDR2_...

  • Page 99: Advanced Menu

    →←: Select Menu POST Check LAN Cable [Disabled] POST Check LAN2 Cable [Disabled] Enables or disables checking of the LAN/LAN2 cable during the Power-On Self-Test (POST). Configuration options: [Disabled] [Enabled] ASUS Striker Extreme Advanced Power Boot Tools -/+: Change Value...

  • Page 100: Pcipnp

    4.5.2 PCIPnP Plug & Play O/S Primary Display Adapter Plug & Play O/S [No] When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot.

  • Page 101: Onboard Device Configuration

    Allows you to enable or disable the IDE DMA transfer access. Configuration options: [Disabled] [Enabled] IDE Prefetch Mode [Enabled] Allows you to enable or disable the IDE PIO read prefetch mode. Configuration options: [Disabled] [Enabled] ASUS Striker Extreme Advanced [Auto] [AC97] [Enabled]...
  • Page 102 Serial-ATA Configuration This sub-menu allows you to change Serial ATA settings. Select an item then press <Enter> to edit. Serial-ATA Configuration Serial-ATA Controller RAID Enabled SATA1 SATA2 SATA3 SATA4 SATA5 SATA6 Serial-ATA Controller [Enabled] Allows you to enable or disable the onboard Serial ATA controller. Configuration options: [Disabled] [Enabled] RAID Enabled [Disabled] Enables or disables the onboard RAID controller.

  • Page 103: Usb Configuration

    Allows you to enable or disable the USB 2.0 controller. Configuration options: [Disabled] [Enabled] USB Legacy Support [Enabled] Allows you to enable or disable support for USB devices on legacy operating systems (OS). Configuration options: [Disabled] [Enabled] ASUS Striker Extreme Advanced [Enabled] [Enabled] [Enabled]...

  • Page 104: Power Menu

    Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options. Main Extreme Tweaker ACPI Suspend Type ACPI APIC support APM Configuration...

  • Page 105: Apm Configuration

    USB Resume from S5 [Disabled] Allows you to enable or disable the support of USB keyboard or mouse resumption from S5. Configuration options: [Disabled] [Enabled] ASUS Striker Extreme [Power-Off] Item Specific Help [Instant-Off]...
  • Page 106 Restore on AC Power Loss [Power-Off] Allows you to enable or disable the Restore on AC Power Loss function. Configuration options: [Power-Off] [Power-On] PWR Button < 4 secs [Instant-Off] Allows you to set the event after the power button is pressed for more than 4 seconds.

  • Page 107: Hardware Monitor

    VTT CPU / DDR2 Termination /DDR2 Voltage +1.4V / DDR2 Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. ASUS Striker Extreme Item Specific Help Press [Enter] to go to the sub-menu. [600 RPM]...
  • Page 108 Temperature Monitor Power Temperature Monitor CPU Temperature M/B Temperature OPT1 Temperature OPT2 Temperature OPT3 Temperature CPU, M/B, OPT1/2/3 Temperature The onboard hardware monitor automatically detects and displays the motherboard, CPU, and OPT1/2/3 temperatures. These items are not user-configurable. Fan Speed Monitor Power Fan Speed Monitor CPU Fan Speed...

  • Page 109: Fan Speed Control

    [30ºC/86ºF] [35ºC/95ºF] [40ºC/104ºF] [45ºC/113ºF] [50ºC/122ºF] [55ºC/131ºF] [60ºC/140ºF] [65ºC/149ºF] [70ºC/158ºF] [75ºC/167ºF] [80ºC/176ºF] [85ºC/ 185ºF] The thermo sensor cables need to be connected to the optional fans first for this function. ASUS Striker Extreme Item Specific Help [Duty Cycle Mode] [100%] Press [Enter] to enable [Duty Cycle Mode] or disable.
  • Page 110 CPU Fan Speed warning [600 RPM] Allows you to set the CPU fan warning speed function, which gives off a warning when the CPU fan speed is too low. If you set this item to [Disabled], the system will not warn you even if no fan is installed or if the fan is not functioning properly. Configuration options: [Disabled] [600 RPM] [1200 RPM] [1600 RPM] 4-36 Chapter 4: BIOS setup...

  • Page 111: Boot Menu

    These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Configuration options: [Removable] [Hard Disk] [CDROM] [Disabled] ASUS Striker Extreme Advanced Power Boot...

  • Page 112: Cdrom Drives

    4.7.2 Removable Drives 1. Floppy Disks 1. Floppy Disks Allows you to assign a removable drive attached to the system. 4.7.3 Hard Disk Drives 1. 1st Master: XXXXXXXXX 1. 1st Master: XXXXXXXXX Allows you to assign hard disk drives attached to the system. 4.7.4 CDROM Drives 1.

  • Page 113: Boot Settings Configuration

    Allows you to set the keystroke rate. Enable this item to configure the Typematic Rate (Chars/Sec) and the Typematic Delay (Msec). Configuration options: [Disabled] [Enabled] The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) become user-configurable only when the item Typematic Rate Setting is enabled. ASUS Striker Extreme Boot [Enabled] [Enabled] [Disabled]...

  • Page 114: Security

    Full Screen LOGO [Enabled] Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Make sure that the above item is set to [Enabled] if you want to use the ASUS MyLogo3™ feature. Halt On [All Errors] Allows you to set the error report type.

  • Page 115: Password Check

    This field requires you to enter the password before entering the BIOS setup or the system. Select [Setup] to require the password before entering the BIOS Setup. Select [System] to require the password before entering the system. Configuration options: [Setup] [System] ASUS Striker Extreme 4-41...

  • Page 116: Tools Menu

    ↑↓ : Select Item ESC: Exit →←: Select Menu ASUS Music Alarm [Disabled] Allows you to enable or disable the ASUS Music Alarm function. Configuration options: [Disabled] [Enabled] The succeeding items become user-configurable when you enable the ASUS Music Alarm.

  • Page 117: Asus O.c. Profile

    Load BIOS Profile Save BIOS Profile Load BIOS Profile Phoenix-Award BIOS CMOS Setup Utility Load BIOS Profile Load from Profile 1 Load from Profile 2 Load from File ASUS Striker Extreme Tools Tools Select Menu Item Specific Help Press [Enter] to select.

  • Page 118: Save Bios Profile

    Load from Profile 1/2 Allows you to load the previous BIOS settings saved in the BIOS Flash. Press <Enter> to load the file. Load from File Allows you to load the previous BIOS file saved in the hard disk/floppy disk/USB flash disk with the FAT32/16/12 format.

  • Page 119: Asus Ez Flash 2

    The BIOS file will be saved as “xxx.CMO“. 4.8.3 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice.

  • Page 120: Exit Menu

    Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Main Extreme Tweaker Exit & Save Changes Exit & Discard Changes Load Setup Default Discard Changes F1:Help...

  • Page 121: Chapter 5: Software Support

    This chapter describes the contents of the support CD that comes with the motherboard package. Software support...
  • Page 122 Chapter summary Installing an operating system ... 5-1 Support DVD information ... 5-1 Software information ... 5-9 RAID configurations ... 5-26 Creating a RAID driver disk ... 5-41 ASUS Striker Extreme...

  • Page 123: Installing An Operating System

    The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website(www.asus.com) for updates. 5.2.1 Running the support DVD Place the support DVD to the optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer.

  • Page 124: Drivers Menu

    The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstAll driver installation wizard. Nvidia Chipset Driver Program...

  • Page 125: Utilities Menu

    The ASUS AI Booster application allows you to overclock the CPU speed in Windows environment. ® 3DMark06 Software Installs the 3DMark06 software. ASUS Music Alarm The ASUS Music Alarm is an audio alarm clock that uses your favorite CD music to give you a personal wake-up call. ASUS Striker Extreme...
  • Page 126 Adobe Reader V7.0 Installs the Adobe Acrobat Reader that allows you to open, view, and print ® ® documents in Portable Document Format (PDF). Microsoft DirectX 9.0c Installs the Microsoft DirectX 9.0c driver. The Microsoft DirectX 9.0c is a ® ®...

  • Page 127: Make Disk Menu

    Silicon Image 64bit RAID Driver Silicon Image 64bit SATA Driver Allows you to create a Silicon Image system. ASUS Striker Extreme Serial ATA RAID driver disk for a 32-bit/64-bit ® RAID/Serial ATA driver disk for a 32-bit ® RAID/Serial ATA driver disk for a 64-bit ®...

  • Page 128: Manuals Menu

    5.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. Reader from the Utilities menu before opening a user manual ®...

  • Page 129: Other Information

    The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. Browse this DVD Displays the support DVD contents in graphical format. ASUS Striker Extreme...

  • Page 130: Technical Support Form

    Technical support form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support DVD and a brief description of each in text format. Chapter 5: Software support...

  • Page 131: Software Information

    5.3.1 ASUS MyLogo3™ The ASUS MyLogo3™ utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On Self-Tests (POST). The ASUS MyLogo3™ is automatically installed when you install the ASUS Update utility from the support CD.
  • Page 132 Ratio box. When the screen returns to the ASUS Update utility, flash the original BIOS to load the new boot logo. 10. After flashing the BIOS, restart the computer to display the new boot logo during POST.

  • Page 133: Soundmax ® High Definition Audio Utility

    Jack Retasking function works on High Definition front panel audio ports only. If the SoundMAX audio utility is correctly installed, you ® will find the SoundMAX icon on the taskbar. ® ASUS Striker Extreme High Definition Audio utility ® audio utility with AudioESP™ software to ® requires Microsoft Windows ®...

  • Page 134: Audio Setup Wizard

    From the taskbar, double-click on the SoundMAX icon to display the SoundMAX ® ® Control Panel. Audio Setup Wizard By clicking the icon from the SoundMAX control panel, you can easily ® configure your audio settings. Simply follow succeeding screen instructions and begin enjoying High Definition Audio.
  • Page 135 Adjust microphone volume This screen helps you adjust microphone volume. You will be asked to read pre- written text to allow the AudioWizard to adjust the volume as you speak. ASUS Striker Extreme Adjust speaker volume This screen helps you adjust speaker volume.
  • Page 136 Audio preferences Click the icon to go to the Preferences page. This page allows you to change various audio settings. General options Click the General tab to choose your playback and recording devices, enable/ disable the AudioESP™ feature, and enable/disable digital output. This feature is consists of two elements: DTS interactive and DTS NEO:PC.

  • Page 137: Microphone Options

    You can enable it when you have conference call to reduce echoes in the other side. The directional Array and Speaker Phone function only when working with the ASUS Array Mic. ASUS Striker Extreme...

  • Page 138: Asus Pc Probe Ii

    ® To launch the PC Probe II from the Windows > ASUS > PC Probe II > PC Probe II v1.xx.xx. The PC Probe II main window appears. After launching the application, the PC Probe II icon appears in the Windows taskbar.
  • Page 139 When displayed, the monitor panel for that sensor also turns red. Refer to the Monitor panels section for details. Preferences You can customize the application using the Preference section in the main window. Click the box before each preference to activate or deactivate. ASUS Striker Extreme Function 5-17...
  • Page 140 Hardware monitor panels The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. The hardware monitor panels come in two display modes: hexagonal (large) and rectangular (small). When you check the Enable Monitoring Panel option from the Preference section, the monitor panels appear on your computer’s desktop.
  • Page 141 DMI browser Click to display the DMI (Desktop Management Interface) browser. This browser displays various desktop and system information. Click the plus sign (+) before DMI Information to display the available information. ASUS Striker Extreme Small display 5-19...
  • Page 142 PCI browser Click to display the PCI (Peripheral Component Interconnect) browser. This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard disk drive space, and memory usage.
  • Page 143 The Preference tab allows you to customize sensor alerts, or change the temperature scale. Loads the default threshold values for each sensor Applies your changes ASUS Striker Extreme Loads your saved Cancels or configuration ignores your changes Saves your...

  • Page 144: Asus Music Alarm

    This motherboard is equipped with an audio alarm clock called ASUS Music Alarm. The ASUS Music Alarm gives you a personal wake-up called with your favorite CD music when the system is off. The onboard audio CODEC supports this feature, which requires an optical drive (CD-ROM, CD-RW, or DVD-ROM).
  • Page 145 Click the Utilities tab and choose ASUS Music Alarm to install the utility. Insert an audio CD into the optical drive. Launch the ASUS Music Alarm application by going to Start > ASUS > ASUS Music Alarm. The main window appears.
  • Page 146 CD, the ASUS Music Alarm is automatically disabled/turned off. • While the music alarm is playing, the optical drive front panel functions are automatically disabled. • The ASUS Music Alarm works only when the system is off. 5-24 ) next to Options Chapter 5: Software support...

  • Page 147: Asus Ai Booster

    5.3.5 ASUS Ai Booster The ASUS Ai Booster application allows you to overclock the CPU speed in WIndows environment without the hassle of booting the BIOS. ® After installing the program from the bundled support CD, you can launch the utility by double-clicking the Ai Booster icon on the Windows OS taskbar.

  • Page 148: Raid Configurations

    RAID configurations The motherboard comes with two RAID controllers that allow you to configure Serial ATA hard disk drives as RAID sets. The Silicon Image • and RAID 0 sets on the external Serial ATA hard disk drives. The NVIDIA nForce™...

  • Page 149: Nvidia ® Raid Configurations

    Device Configuration > Serial-ATA Configuration” for details. Select and enable the IDE or SATA drive(s) that you want to configure as RAID. See section “4.5.3 Onboard Device Configuration > Serial-ATA Configuration” for details. Save your changes and Exit Setup. ASUS Striker Extreme 5-27...

  • Page 150: Entering The Nvidia Raid Utility

    Make sure to re-enter your NVRAID settings after the CMOS is cleared; otherwise, the system will not recognize your RAID setup. • For detailed descriptions on the NVIDIA “NVIDIA • When using Windows Windows Entering the NVIDIA To enter the NVIDIA ®...

  • Page 151: Creating A Raid Volume

    Press <Y> to clear the selected disks or <N> to proceed without clearing the disks. The following screen appears. Take caution in using this option. All data on the RAID drives will be lost! ASUS Striker Extreme Mirroring Striping Stripe Mirroring Spanning ↑...

  • Page 152: Rebuilding A Raid Array

    [Ctrl-X]Exit A new set of navigation keys is displayed on the bottom of the screen. Press <Ctrl+X> to save settings and exit. Rebuilding a RAID array To rebuild a RAID array: From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>.
  • Page 153 Press <Enter> to start rebuilding array or press <Esc> to cancel. After the rebuild process, the Array list menu appears. You will need to enter Window complete the rebuilt process. ASUS Striker Extreme Array 1 : NVIDIA MIRROR XXX.XXG - Select Disk Inside Array -...

  • Page 154: Deleting A Raid Array

    Deleting a RAID array To delete a RAID array: From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>. The RAID Array details appear. RAID Mode: Mirroring Striping Width: 1 Adapt Channel [R] Rebuild...

  • Page 155: Clearing A Disk Data

    Press <C> to clear disk. The following confirmation message appears. Press <Y> to clear the disk data or press <N> to cancel. Take caution in using this option. All data on the RAID drives will be lost! ASUS Striker Extreme Array 1 : NVIDIA MIRROR XXX.XXG...

  • Page 156: Silicon Image ® Raid Configurations

    5.4.3 Silicon Image The Silicon Image RAID controller allows you to configure RAID 1 and RAID 0 sets ® on the external Serial ATA hard disk drives. Use the Silicon Image RAID utility to configure a disk array. Installing External Serial ATA (E-SATA) hard disks To install the External SATA hard disks for a RAID configuration: Connect one end of the E-SATA signal cables to the rear panel port.
  • Page 157 The following lists the keys found in the legend box and their corresponding functions. : Select/Move to the next item ↑, ↓ : Previous Menu Enter : Select Ctrl-E : Exit ASUS Striker Extreme HELP Press “Enter” to create RAID set LOGICAL DRIVE XXXXXXMB STXXXXXXXXX XXXXXXMB STXXXXXXXXX...
  • Page 158 Creating a RAID 0 set (Striped) To create a RAID set: From the Silicon Image configuration utility main menu, select Create RAID set then press <Enter> to display an option menu. Select RAID 0 then press <Enter> to display the following.
  • Page 159 Create RAID set then press <Enter>. The following sub-menu appears. Select RAID 1 then press <Enter> to display the following. ASUS Striker Extreme PHYSICAL DRIVE XXXXXXXXXXX XXXXXXXXXXX XXXXXXXXXXX XXXXXXXXXXX MAIN MENU Create RAID set RAID0...

  • Page 160: Manual Configuration

    Select your desired method of configuration. Auto configuration a. Select Auto Configuration then press <Enter>. b. The utility prompts a message to input the RAID size, use the up or down arrow keys to set the RAID size then press <Enter>. Press <Y>...
  • Page 161 RAID size then press <Enter>. Press <Y> to confirm or <N> to return to the Main Menu. A copy progress appears if you previously selected offline copy. ASUS Striker Extreme MAIN MENU Auto configuration...

  • Page 162: Creating A Concatenation Set

    Creating a CONCATENATION set To create a CONCATENATION set: From the Silicon Image configuration utility main menu, select Create RAID set then press <Enter>. From the sub-menu Select CONCATENATION then press <Enter>. The selection bar moves to the Physical Drive menu. Using the up or down arrow keys, select a drive then press <Enter>...

  • Page 163: Creating A Raid Driver Disk

    Press <F6> then insert the floppy disk with RAID driver into the floppy disk drive. Follow the succeeding screen instructions to complete the installation. Due to chipset limitation, the Serial ATA ports supported by the NVIDIA chipset doesn’t support Serial Optical Disk Drives (Serial ODD) under DOS. ASUS Striker Extreme 2000/XP ® 5-41...
  • Page 164 5-42 Chapter 5: Software support...

  • Page 165: Chapter 6: Nvidia Sli™ Technology Support

    This chapter tells how to install SLI-ready PCI Express graphics cards. ® NVIDIA SLI™ technology support...
  • Page 166 Chapter summary Overview ... 6-1 Dual graphics cards setup ... 6-2 ASUS Striker Extreme...

  • Page 167: Overview

    The NVIDIA SLI technology supports Windows system only. • Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics card and supported 3D application list. ASUS Striker Extreme SLI™ (Scalable Link Interface) technology ® XP™ 32-bit/64bit operating ® ®...

  • Page 168: Dual Graphics Card Setup

    Dual graphics card setup 6.2.1 Installing SLI-ready graphics cards Install only identical SLI-ready graphics cards that are NVIDIA Different types of graphics cards will not work together properly. To install the graphics cards: Prepare two graphics cards. Each graphics card should have goldfingers for the SLI connector.
  • Page 169 Insert the second graphics card into the other slot (PCIEX16_3). Make sure that the card is properly seated on the slot. If required, connect an auxiliary power source to the PCI Express graphics cards. ASUS Striker Extreme...
  • Page 170 Align and insert the SLI connector to the goldfingers on each graphics card. Make sure that the connector is firmly in place. When installing two VGA cards using a 20-pin ATX PSU with sufficient+12v capability, we recommend that you connect the auxillary power source from the power supply to the graphics card.

  • Page 171: Installing The Device Drivers

    Windows taskbar. From the pop-up menu, select nView Desktop Manager then click nView Properties. From the nView Desktop Manager window, select the Desktop Management tab. Click Properties to display the Display Properties dialog box. ASUS Striker Extreme ® NVIDIA Settings icon...
  • Page 172 From the Display Properties dialog box, select the Settings tab then click Advanced. Select the NVIDIA GeForce tab. Click the slider to display the following screen, then select the SLI multi-GPU item. Click the Enable SLI multi-GPU check box. Click OK when done. Slider Chapter 6: NVIDIA ®...

Table of Contents