Maytag MHW8000AG Use And Care Manual page 24

Front-loading automatic washer
Hide thumbs Also See for MHW8000AG:
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.maytag.com/product_help –
If you experience
Washer not performing as expected (cont.)
Clogged dispensers or laundry
Incorrect dispenser
products dispensing too soon.
operation
Liquid chlorine bleach not used in
bleach compartment.
Water in dispenser after cycle has
finished.
Single-dose laundry
Adding laundry packet incorrectly.
packet not dissolving
Cycle time changes or
Normal washer operation.
cycle time too long
Excessive suds in washer.
Load may be out of balance.
Not using correct cycle for load type.
24
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
Possible Causes
Do not overfill dispenser. Overfilling causes immediate dispensing.
Load dispensers before starting a cycle.
Homes with low water pressure may result in residual powder in the
dispenser. To avoid, select a warmer wash temperature if possible,
depending on your load.
Use only liquid chlorine bleach in the bleach compartment.
It is normal for small amounts of water to remain in dispenser at the
end of the cycle.
Be sure laundry packet is added to washer drum before adding
clothes. Do not add packet to dispenser. Follow the manufacturer's
instructions to avoid damage to your garments.
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The options you
select will also affect the cycle times.
When excessive suds are detected, a special suds routine
automatically starts to remove extra suds and ensure proper rinsing
of your garments. This routine will add time to the original cycle.
When load unbalance occurs, a washing process will start to
redistribute the load. This may lengthen the cycle time. Avoid
washing single items. Balance a single item such as a rug or jeans
jacket with a few extra items.
The Overnight Wash & Dry cycle is designed for smaller load sizes
(3–4 items) of lightly soiled garments. If larger loads are washed in
this cycle, cycle time will be increased.
When using the Overnight Wash & Dry or Delicates cycle, you
should wash small loads. This ensures a gentle wash for your
garments without increasing cycle times.
Solution

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhw8000awFront-loading automatic washer

Table of Contents