Installing The I/O Shield - Intel D845GEBV2 - Desktop Board Motherboard Product Manual

Intel Desktop Board D845GERG2/D845GEBV2 Product Guide

Installing the I/O Shield

The desktop board comes with an I/O shield. When installed in the chassis, the shield blocks radio
frequency transmissions, protects internal components from dust and foreign objects, and promotes
correct airflow within the chassis.
Install the I/O shield before installing the desktop board in the chassis. Place the shield inside the
chassis as shown in Figure 4. Press the shield into place so that it fits tightly and securely. If the
shield doesn't fit, obtain a properly-sized shield from the chassis supplier.
22
Figure 4. Installing the I/O Shield
OM11310