Charging The Battery Pack - Sony Handycam HDR-PJ790V Operating Manual

Charging the battery pack

1
Turn off your camcorder by
closing the LCD screen, and
attach the battery pack (be sure
to store the viewfinder first).
Align the indentation on the camcorder

and projection on the battery pack, then
slide the battery pack upwards.
2
Connect the AC Adaptor () and
the power cord (mains lead) ()
to your camcorder and the wall
outlet (wall socket).
The CHG (charge) lamp turns on.

The CHG (charge) lamp turns off when the

battery pack is fully charged. Disconnect
the AC Adaptor from the DC IN jack of
your camcorder.
Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.

When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FV100

battery pack.
You cannot use the NP-FV30 "InfoLITHIUM" battery pack with your camcorder.

In the default setting, the power turns off automatically if you leave your camcorder without any

operation for about 2 minutes, to save battery power ([Power Save], p. 54).
Battery pack
CHG (charge) lamp
DC plug

To the wall outlet (wall socket)
DC IN jack
Align the  mark
on the DC plug
with that on the
DC IN jack

GB
1