Sony Handycam HDR-PJ790V Operating Manual page 9

the product safely. Hand the battery over
to the applicable collection point for the
recycling of waste batteries.
For more detailed information about
recycling of this product or battery, please
contact your local Civic Office, your
household waste disposal service or the
shop where you purchased the product.
Notice for customers in the United
Kingdom
A moulded plug complying with BS 1363 is
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to
be replaced, a fuse of the same rating as the
supplied one and approved by ASTA or BSI
to BS 1362, (i.e., marked with an
mark) must be used.
If the plug supplied with this equipment has
a detachable fuse cover, be sure to attach
the fuse cover after you change the fuse.
Never use the plug without the fuse cover.
If you should lose the fuse cover, please
contact your nearest Sony service station.
For information on your camcorder model,
see the following page:
Functions and equipment  p.11
About language setting
Change the screen language before using the

camcorder if necessary (p. 22). The on-screen
displays in each local language are used for
illustrating the operating procedures.
On recording
Before starting to record, test the recording

function to make sure the image and sound are
recorded without any problems.
Compensation for the contents of recordings

cannot be provided, even if recording or
or
playback is not possible due to a malfunction of
the camcorder, recording media, etc.
TV color systems differ depending on the

country/region. To view your recordings on
a TV, you need a TV that supports the signal
format for your camcorder. For details on the
signal format, refer to "How to use this manual"
(p. 11).
Television programs, films, video tapes,

and other materials may be copyrighted.
Unauthorized recording of such materials may
be violate to the copyright laws.
Notes on use
Do not do any of the following. If any of those

are done, the recording media may be damaged,
recorded images may be impossible to play back
or may be lost, or other malfunctions could
occur.
ejecting the memory card when the access

lamp (p. 25) is lit or flashing
removing the battery pack or AC Adaptor

from the camcorder, or applying mechanical
shock or vibration to the camcorder when the
access lamp (p. 25) are lit or flashing
(Movie)/ (Photo) lamps (p. 15) or the
GB