Sony KDL40W5500U Operating Instructions Manual page 38

Auto Start-up
Language
Product Information
Factory Settings
Analogue Set-up
Programme List
Display
1 Digit Direct
Favourite Set-up
Auto Tuning
Programme Sorting
38
GB
Auto Devices Off When this is set to "On," the connected equipment that is
compatible with control for HDMI turns off when you turn
off the TV.
Auto TV On
When this is set to "On," the TV turns on when you turn on
the connected equipment that is compatible with control for
HDMI.
HDMI Device List Displays a list of connected equipment that is compatible
with control for HDMI.
~
• You cannot use "Control for HDMI" if the TV operations are linked to the
operations of an audio system that is compatible with control for HDMI.
You can run the initial set-up that appeared when you first connected the TV, and
select the language and country/area, the region (Australian model only), or tune in
all available channels again.
Even if you have made the settings when you first connected the TV, you may need
to change the settings after moving house, or to search for newly launched
channels.
Sets the language displayed on the menu screens.
Displays product information of the TV.
Resets all settings to factory settings except for the "Programme Block" setting,
"Favourite" setting, and programme preset data. After completing this process, the
initial set-up screen is displayed. Completing auto tuning in initial set-up will reset
the settings that are not reset by "Factory Settings." To retain the settings, skip the
"Auto Tuning."
Select "Off" to hide the list of analogue channels from the XMB™
(XrossMediaBar).
When "1 Digit Direct" is set to "On," you can select an analogue channel using one
preset number button (0 – 9) on the remote.
~
• When "1 Digit Direct" is set to "On," you cannot select channel numbers 10 and
above by entering two digits on the remote.
Allows you to set your favourite channels by assigning the desired channel
numbers.
To reset the favourite channels, select "– – –."
Tunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Changes the order of analogue channels stored in the TV.
1
Press F/f to select the channel you want to move to a new position, then press
.
2
Press F/f to select the new position for the channel, then press
.