Solving Recovery Problems - Lenovo ThinkCentre A35 Quick Reference Manual

(english) quick reference for thinkcentre a35 (type 8139)
Hide thumbs Also See for ThinkCentre A35:
Table of Contents

Advertisement

Note: After restoring your hard disk to the original factory content, you
might have to reinstall some software o drivers. See "Post-recovery
notes" for details.
v For information about other features of the Rescue and Recovery
workspace, click Help.
Post-recovery notes
Notes:
1. After restoring a hard disk to the original factory contents you might have
to reinstall device drivers for some devices. See "Recovering or installing
device drivers" on page 17.
2. Some computers come with Microsoft Office or Microsoft Works
preinstalled. If you need to recover or reinstall your Microsoft Office or
Microsoft Works applications, you must use the Microsoft Office CD or
Microsoft Works CD. These CDs are provided only with computers that
come with Microsoft Office or Microsoft Works preinstalled.

Solving recovery problems

The Rescue and Recovery workspace runs independently of the operating
system. In order to gain access to the workspace, repeatedly press and release
the Enter or F11 key during startup. If you are unable to start the Rescue and
Recovery workspace using this method, you have three options:
v Use your rescue media (CD, DVD, or USB hard disk) to start the Rescue and
Recovery workspace. See "Creating and using rescue media" on page 16 for
details.
v Use a Recovery Repair diskette to reinstall a file that controls access to the
Rescue and Recovery workspace. See "Creating and using a Recovery Repair
diskette" on page 16 for details.
v If your intent is to restore the hard disk to its original factory contents, you
can use a set of Product Recovery discs. See "Creating and using product
recovery discs" on page 11.
It is a good idea to create a Recovery Repair diskette, rescue media, and a set
of Product Recovery discs as soon as possible and store them in a safe place as
a precautionary measure.
If you are unable to access the Rescue and Recovery workspace from rescue
media or a set of Product Recovery CDs, you might not have the rescue device,
CD drive, DVD drive or USB hard disk drive, defined as a startup device in
the BIOS startup sequence. See "Setting a rescue device in the startup
sequence" on page 18 for more information.
Chapter 3. Recovering software
15

Advertisement

Table of Contents
loading

Table of Contents